Tag: build

Don’t Forget to stock up for Memorial day!

HAPPY MEMORIAL DAY from Voltage Vapin’!!

memorial day

With Memorial Day approaching, we just wanted to take a moment to remember all of those who made the ultimate sacrifice for our country.

Voltage Vapin would like to send out a special thanks to the current men and women serving in the military for their ongoing service and dedication.

 We will be closed on Memorial Day and will reopen on Tuesday May 30th @11:00am

Best wishes for a wonderful holiday weekend!

Sincerely,

All the staff at Voltage Vapin’



Make sure you have all your building needs for Memorial Day!

Kaos V2 Build Kit

kaos build kit

Whether you’re an experienced builder or just starting out, the Kaos V2 Buld Kit is a must have!  Designed by builders for builders, it contains over 25 high quality tools to assist you in making anything from simple coils to the most extravagant of builds!  A durable, reinforced case, makes keeping all of your tools in one place a snap!

You Will Receive:

  • Needle nose pliers
  • Cutter pliers
  • Ceramic Tweezers
  • Pen Style Screwdriver kit
  •  Stainless Steel Tweezers
  • Hex key kit
  • Container for cotton squares
  • Container for prebuilt coils
  • Angled Wire cutter
  • Ohm Meter
  • Stainless steel scissors
  • Coiling Kit

A builders’ dream come true, stop in Voltage Vapin’ today to get your Kaos V2 Build Kit!



Don’t forget the perfect RDA!

Vapergate Mason Gemini 30mm RDA

mason gemini

The Mason Gemini is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  It is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow has a dual air slot configuration along with the top cap option that allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction

The Mason Gemini is the next level of RDA awesomeness so make it yours at Voltage Vapin’!



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

memorial

The Host of this Saturday’s Rebuild Class May 27th will be our very own Skyler at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, May 27th, and hosted by Skyler. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

skyler

build classbuild classbuild classbuild class

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Smok Skyhook!

skyhook

Smok made it’s way into the RDTA box market with a dramatic, yet familiar look!

A dual battery unit, the Skyhook is also a temp control mod, and a powerhouse to boot. The Smok Skyhook totes 220 watts, which makes it a rebuildable juggernaut with a built-in 9ml tank.  Reminiscent of the Alien Box mod, the screen is on the front of the mod, and the button is on the side.  This allows for easy access to the display, and for wattage adjustment.

Features:

  • 220w Max power
  • 9ml built in tank
  • Big side fire bar
  • 0.96inch Oled screen
  • Floating velocity posts
  • Support single coil buils

The Smok Skyhook… make it your next go-to mod here at Voltage Vapin’!



Fill up your Skyhook with an awesome liquid from Aisle 7!

Aisle 7 is a top-notch line of milky cereal flavors brought to you by the wonderful folks at Diamond Vapor.  If you haven’t tried any of these flavors before, you’re in for a real treat!

Irish Gold – The milk after a bowl of your favorite charms cereal

Square Crazy – The milk after your favorite cinnamon cereal.

Nora’s Dream – Back by popular demand! The milk after a bowl of your favorite fruity cereal.

Stop in today and find your new favorite cereal flavor from Aisle 7 at Voltage Vapin’!



no sale

Please make sure you have your I.D. present when entering the store. We are required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The Host of this Saturday’s Rebuild Class May 20th will be our very own Thor at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, May 20th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

Thor

classclassclassclass

 

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Mason Gemini!

Vapergate Mason Gemini 30mm RDA

mason gemini

The Mason Gemini is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  It is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow has a dual air slot configuration along with the top cap option that allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Top Slot
      • 8mm by 2mm
    • Bottom Slot
      • 8mm by 3mm
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction
  • Threaded Delrin 510 Heat Sink
    • 10mm Stainless Steel Widebore Drip Tip
    • 10mm Delrin Widebore Drip Tip
  • Copper 510 Connection

The Mason Gemini is the next level of RDA awesomeness so make it yours at Voltage Vapin’!



Every builder needs a build kit!

Kaos V2 Build Kit

kaos build kit

Whether you’re an experienced builder or just starting out, the Kaos V2 Buld Kit is a must have!  Designed by builders for builders, it contains over 25 high quality tools to assist you in making anything from simple coils to the most extravagant of builds!  A durable, reinforced case, makes keeping all of your tools in one place a snap!

You Will Receive:

  • Needle nose pliers
  • Cutter pliers
  • Ceramic Tweezers
  • Pen Style Screwdriver kit
  •  Stainless Steel Tweezers
  • Hex key kit
  • Container for cotton squares
  • Container for prebuilt coils
  • Angled Wire cutter
  • Ohm Meter
  • Stainless steel scissors
  • Coiling Kit

A builders’ dream come true, stop in Voltage Vapin’ today to get your Kaos V2 Build Kit!



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The host of this Saturday’s Rebuild Class April 22nd will be Chris Moore at Voltage Vapin’!

You may know Chris as Chris Mohm from many popular vape forums.  The rebuild class will be from 2 to 4 PM on Saturday, April 22nd. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

chris moore

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Calypso!

Alpha Ohmega Calypso RTA

calypso

The Ohmega Calypso is an impressive new tank that yields the old genitank style. You can set up the Calypso for use with single or dual coils, with a PMMA plug that does not detract from the barrel airflow. The Calypso includes many accessories to really get the most out of your new RTA and to personalize it as much as possible.

Features:

  • 30mm RTA
  • Built by Ohmega
  • Solid SS construction
  • Genesis-style atomizer
  • Single or dual coil setup available
  • Four-post deck with PEEK insulator
  • Copper 510 adjustable positive pin
  • Glass or SS tank section
  • Wide bore Chuff top or add your own drip tip with SS top cap
  • 2.8mm lead holes
  • Beefy Philips head post screws

The Ohmega Calypso, get it, wick it, fill it, vape it! Available now at Voltage Vapin’!



Do you want to start building but you’re on a budget?

wirebacon

You don’t need to spend a fortune on expensive gear to start building. Come see us for all your coil building needs.



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

Thanks to our very own Skyler for teaching the Rebuild Class here at Voltage Vapin’!

A big thanks goes to our very own Skyler for teaching everyone to rebuild their coils at the Rebuild Class this Saturday!

classclassclassclass

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Skyler taught a lot of people how to build their attys. The next rebuild class will be from 2pm-4pm, on March 25th.

Come hang out any Saturday for our free rebuild class to learn from some of the best. We cover how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you. However, we can teach you with step by step instructions during the Rebuild class.



Build like a pro with the Coil Master Kit!

build kit

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries! This kit goes above and beyond, so far that you’ll miss it if you don’t check it out soon!

Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



Build in style with one of our Coil Master Mats!

build mat

The Coilmaster build mat is a great new addition to any builders arsenal and it’s made with great quality! This Mat is great to protect you desk or table when you do your builds.It measures 33×15 Plenty of room for the beginner or advanced builder. When you are clipping those pesky leads, they actually stick to the mat instead of bouncing and flying everywhere!

With Coil Master’s Build Kit and Build Mat from Voltage Vapin’, you’ll be a professional builder in no time!



voltage

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

build class

 

The Host of this Saturday’s Rebuild Class February 18th will be our very own Thor at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, February 18th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

voltage

 

voltagevoltagevoltagevoltage

 

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Calypso!

voltage

The Ohmega Calypso is brought to us by the same company as the Ohmega Alpha BFT, Ohmega Mods.  This impressive new tank yields the old genitank style, where the wick is dropped into the liquid, and draws up to the coils.  You can also set up the Calypso for use with single or dual coils, with a PMMA plug that does not detract from the barrel airflow. Three 7mm slits are found on both sides of the barrel, for a total of 42mm of airflow. The Calypso includes many accessories to really get the most out of your new RTA and to personalize it as much as possible.

Features:

  • 30mm RTA
  • Built by Ohmega
  • Solid SS construction
  • Genesis-style atomizer
  • Single or dual coil setup available
  • Four-post deck with PEEK insulator
  • Copper 510 adjustable positive pin
  • Glass or SS tank section
  • Wide bore Chuff top or add your own drip tip with SS top cap
  • 2.8mm lead holes
  • Beefy Philips head post screws

The Ohmega Calypso, get it, wick it, fill it, vape it! Available now at Voltage Vapin’!


Drip without the hassle with the new…

SMOK Skyhook

voltage

Smok has made it’s way into the RDTA box market with a dramatic, yet familiar look!

A dual battery unit, the Skyhook is also a temp control mod, and a powerhouse to boot. The Smok Skyhook totes 220 watts, which makes it a rebuildable juggernaut with a built in tank.  Reminiscent of the Alien Box mod, the screen is on the front of the mod, and the button is on the side.  This allows for easy access to the display, and for wattage adjustment.  A built-in tank holds 9 ml of e-liquid and the side window shows how much e-liquid is left.

Features:

  • 220w Max power
  • 9ml built in tank
  • Big side fire bar
  • 0.96inch Oled screen
  • Floating velocity posts
  • Support single coil buils

Available in Red and Black, Blue and Black, and Stainless and Black.

The Skyhook is here… make it your next go-to mod here at Voltage Vapin’!



voltage

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: voltage