Tag: velocity

The Host of this Saturday’s Rebuild Class March 11th will be our very own Chris at Voltage Vapin’! (UPDATED)

The rebuild class will be from 2 to 4 PM, Saturday, March 11th, and hosted by Chris. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

class

classclassclassclass

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Velocity V2!

(Discontinued)

class

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor

Perfect your building techniques with the Velocity V2 from Voltage Vapin’!



Build in style with one of our Coil Master Mats!

class

The Coilmaster build mat is a great new addition to any builders arsenal and its made with great quality!. This Mat is great to protect you desk or table when you do your builds.It measures 33×15 Plenty of room for the beginner or advanced builder. When you are clipping those pesky leads, they actually stick to the mat instead of bouncing and flying everywhere!

Build like a pro on the Coil Master Build Mat from Voltage Vapin’!



class

Please make sure you have your I.D. present when entering the store and we are now required by law to I.D. anyone who appears to be 27 years of age or younger.

Voltage Vapin’ apologizes for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: class

Thanks to our very own Kevin for teaching the Rebuild Class here at Voltage Vapin’! (UPDATED)

A big thanks goes to our very own Kevin for teaching everyone to rebuild their RDAs and rebuildable tanks at the Rebuild Class this Saturday!

class class class class class

 

 

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Kevin taught a lot of people how to build their attys. The next rebuild class will be from 2pm-5pm, on November 26th.

Come hang out any Saturday for our free rebuild class to learn from some of the best on how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions during the Rebuild class.



Practice some builds on the…

Velocity V2

(DISCONTINUED)

class

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor


Looking for a small dripper to build on?

Mini Royal Hunter RDA

(DISCONTINUED)

class

The Royal Hunter Mini RDA by Council of Vapor is the evolution of the extremely popular Royal Hunter, packing in the full featured foundation of the original in a short and compact profile. Featuring a triple slotted airflow coupled with three 2mm airholes, the Royal Hunter Mini has tremendous airflow capacity while also being fully adjustable for dual coil purposes. The build deck features the squared PEEK insulators alongside deck milled negatives and a dual split positive post, with each posthole measuring 2mm to accommodate a wide variety of coil configurations. The honeycomb design has been improved, directly integrated into the 13mm wide competition bore delrin drip top, with white and black variations included with each set. This effect greatly increases turbulence in airflow, and with the shortened stature of the Mini, produces outstanding flavor and vapor while simultaneously minimizing spitback due to the inherent design. The Royal Hunter Mini also features the same visually stunning engraving on the base of the atomizer along with a Royal Hunter Mini engraving on the face of the RDA.

Product Features:

  • 22mm Diameter
  • 22mm Overall Height
  • Triple Slotted Airflow
    • Stacked
    • 8mm Wide
  • Triple 2mm Airholes
  • Fully Adjustable Airflow
  • Dual Split Positive Post
  • Deck Milled Negatives
  • 2mm Post Holes
  • Silver Plated Contact
  • Delrin Honeycomb 13mm Widebore Drip Top
    • White and Black Included
    • Removable and Easily Interchangeable
  • Silver Plated Contact
  • The Council of Vapor Engraving


class

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

class

 

Saturday is build day here at Voltage Vapin’! (UPDATED)

In lieu of our build class, practice your builds with the…

Mason 30mm RDA!

build

 

The Mason, also from the great folks at Vapergate, is a work of art! The Mason is rocking the Split Positive post, and the negative posts are milled into the deck, making it very easy to lock down your favorite built coil set.  The Mason is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow is designed in a double stacked air slot configuration along with the top cap option, which allows for a ridiculous amount of air to pass over your coils!

Features:

  • Split Positive Post Build Deck
    • 3mm Diameter Terminals
    • Square PEEK Insulator
      • Anti Spin
    • Deck Milled Negatives
      • 3mm Diameter Terminals
      • Cutaway for Additional Juice Well Space
    • 6mm Juice Well
  • Dual Adjustable Stacked Slotted Airflow
    • Top Slot
      • 8mm by 2mm
    • Bottom Slot
      • 8mm by 3mm
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction
  • Threaded Delrin 510 Heat Sink
    • 10mm Stainless Steel Widebore Drip Tip
    • 10mm Delrin Widebore Drip Tip
  • Copper 510 Connection

The Mason would do any vaper proud!  Make the Mason your new go-to RDA, available for sale at Voltage Vapin’ today!



Get your Squonk mods ready with the…

Velocity V2!

(DISCONTINUED)

build

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor


Looking for an RDTA? Well we have you covered!

iJoy Limitless Plus Two Post RDTA

(DISCONTINUED)

build

The iJoy x Limitless Plus Two Post RDTA builds upon the critically acclaimed Limitless RDTA build deck, and by expanding tank diameter to 25mm, increases tank capacity to an incredible 6.3ml, increasing terminal diameter to 2.5mm each, and improving upon workable build deck space and capability. The Limitless Plus features a two post, dual terminal build deck with each terminal diameter measuring 2.5mm, with a combination of side and top mounted hardened screws allowing for larger thread points and more secure attachment. The gold plated positive post and 510 connection ensures great conductivity, with the positive post fully secured and insulated with PEEK. The acclaimed side fill system from the original has returned, featuring a single 10mm by 3.5mm port positioned between the two deck o-rings providing excellent ergonomics and sealing. Combined with the benchmark setting wicking assembly, in which the users can quickly unthread the mid section of the tank for access into the reservoir itself, the Limitless Plus offers incredible ease of use. Airflow of the Limitless Plus features dual 15mm by 1.5mm airslots throttled via the knurled top cap, with each system including a single coil plug, allowing users to configure more flavor centric coils. Manufactured out quality stainless steel and glass, the Limitless Plus features incredibly high quality paisley engravings, presenting a timeless and striking aesthetic. The iJoy Limitless Plus Two Post RDTA features across the board upgrades to a highly reviewed platform making it a must buy for all build enthusiasts.

Product Features:

  • 25mm Diameter
  • Upgraded Two Post Build Deck
    • Dual Terminal Per Post
      • 2.5mm Diameter Terminals
      • Side and Top Mounted Philips Screws
      • 11mm Post Distance
    • Dual Coil Compatible
    • PEEK Insulation
    • Quad Wicking Ports
      • Sidewall Cutouts
    • Gold Plated Positive
    • Hardened Screws
    • Single Coil Adapter
  • Threaded Mid Section
    • Access Into Tank
    • Easily Wicked System
    • Threaded onto Build Deck
  • Innovative Side Fill
    • Fill Port Positioned Centrally Between Top Cap O-Rings
    • Sealed When Assembled
    • 10mm by 3.5mm
    • 6.3ml Tank Capacity
      • All Day Vape Capacity
  • Dual Slotted Direct Airflow
    • 15mm by 1.5mm Airslot
    • Adjustable via Drip Cap
    • Direct to Coil
    • Knurled Top Cap
  • Adjustable Gold Plated 510
  • Stainless Steel and Glass Construction

Put this hot new genesis style tank in your hands today at Voltage Vapin’!



build

 Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

build

 

Velocity V2 is back in Blue at Voltage Vapin’! (UPDATED)

The squonk compatible Velocity V2 Rda is finally back in stock in blue at Voltage Vapin’!

Velocity V2

(DISCONTINUED)

v2

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor


Remember that little on the go pocket mod that protects your tank?

Well the Tesla Stealth’s are now back in stock at Voltage Vapin’!

Tesla Stealth 100W

(DISCONTINUED)

v2

The new Tesla Stealth is the perfect little on the go mod with 2200mah built-in battery and unique design that allows you to almost put your tank inside of the mod making it the perfect stealth mod. This little guy fires down to 0.1ohms and doesn’t have a screen but instead regulates the power based on the resistance of the coil, here is the surprise though, it can do up 100 watts which make it one of the most powerful mods for its small size! One of the best pocket mods on the market!

  • fires down to 0.1 ohms

  • unique submerged 510 design

  • Durable rubberized finish

  • voltage indicator light

  • self adjusting wattage settings

  • passthrough charging

  • 2200mah li-ion battery

  • max voltage output 4.2 volts

  • compatible with 22.5mm or smaller tanks

The Tesla Stealth, one of the most powerful mods for its small size now at Voltage Vapin’!



Try our brand NEW EZ Dripper!

(DISCONTINUED)

v2

The EZ Dripper is the answer to the question all RDA-using drivers have: “How can I drip while I drive”? Voltage Vapin’s answer: “DON’T! JUST DON’T DO IT!”.  But if you must, the EZ Dripper makes dripping while driving easy!  No more messy laps! Greater, even, the bottle separates from the holder for portable use.  With it’s 30 ml capacity, you could fill this bottle multiple times throughout the day with ease.  Don’t have a car?  Set up the EZ Dripper in your favorite dripping place and let it rip!

See how it works here

Get yourself an EZ Dripper, available at Voltage Vapin’!



v2

 Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

v2

 

Congrats to another Mile High and Friends winner at Voltage Vapin’! (UPDATED)

And the Mile High and Friends winner is…

John Sargent!mile high john sargent

Congratulations John! We hope you enjoy that 120ml bottle of Shortcakes! (DISCONTINUED)

(Shortcakes is part of the Mile High Family… didn’t you know?)

Remember, any purchase over $100 that includes a bottle of Mile High Drip gets you entered for a great chance to win a 120mls of your favorite Mile High and friends flavor! Don’t miss out!

Congratulations again to John, enjoy your bottle of Shortcakes, courtesy of Mile High Drip!!



And the winner is…

Anthony Ortiz!

winner

Congratulations for being a big winner Anthony! We hope you enjoy that SVD 2 (DISCONTINUED) with Apricot e-liquid from Bumble Bee (DISCONTINUED). Once again a big thank you goes to all of our customers because without everyone, giveaways like this would not be possible. We are always having all sorts of drawings and contests so stop on by and check them out. Our next giveaway is going to be a Pissant 60W raptor box mod so stop on by and enter for a chance to win at Voltage Vapin’!

Congratulations again to the winner Anthony and enjoy that SVD 2 and Apricot e-liquid!



The New squonk compatible Velocity V2 has just arrived at Voltage Vapin’ in Stainless!

Velocity V2 (DISCONTINUED)

winner

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor

The Squonk capable Velocity V2, now in Stainless at Voltage Vapin’!



winner

Please make sure you have your I.D. present when entering the store.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.

We still allow customers to bring their children in, as long as they are supervised by their parents.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, and ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



File under:

winner

Velocity V2 Now in Stock at Voltage Vapin’! (UPDATED)

The New squonk compatible Velocity V2 has just arrived at Voltage Vapin’!

Velocity V2 (DISCONTINUED)velocity V2 gunmetal brown lay outvelocity V2 green

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor


The Snow Wolf 200W is the Perfect fit for the Velocity V2!

Snow Wolf 200W Box Mod (DISCONTINUED)Catemizer

 

Snow Wolf 200w Temperature Control Box Mod:

  • Resistance range: 0.05 – 2.5 ohm on the Snow wolf box mod 200w
  • Battery voltage range: 6.2 – 8.4 volts
  • Snow wolf 200w Box Mod Temperature control range: 100 – 350°C / 212 – 662°F
  • Supports both Kanthal and nickel wires
  • Accommodates 2 18650 sized batteries in the Snow wolf 200w
  • Variable wattage range: 5.0 – 200 watts
  • Snow wolf box mod Output voltage range: 0.5 – 7.0 volts

Whoever says that 200 watts is too much hasn’t tried a Snow Wolf. This amazing box has one of the newest smart chips in it that allows the box to know whether you’re using Temperature Control type wire, like nickel, or Kanthal and will automatically switch between the two. This allows you to not go through the hassle of going through the menus to adjust the power mode and temperature settings. Another nice thing about the Snow Wolf is that it when the device is fired above 150w with Kanthal wire, it will turn into a pulse effect so you won’t burn your cotton and still get it pretty dry without actually needing Temperature Control.

So come on down to Voltage Vapin’ and check out the Snow Wolf 200w Temperature Control box mod and join the Wolf Pack!



Interested in dripping but don’t want to drip after every couple of hits? The DripBox 160 is perfect, AND the Velocity V2 will work like a dream on it!

Drip Box 160 (DISCONTINUED IN STAINLESS ONLY)drip box 160 black and stainless

Kanger DRIPBOX 160W Squonk Kit

The Kanger DRIPBOX 160W system builds upon the revolutionary first DRIPBOX, integrating Kanger’s flagship PCB driven by dual 18650 batteries to output up to 160W of power alongside full temperature control for expanded range, versatility, and ability. A dramatic upgrade over the original DRIPBOX, now integrating Kanger’s new chipset that features a maximum output of 160W alongside temperature control suite with onboard support for Ni200 Nickel, TItanium, and Stainless Steel heating elements. The DRIPMOD features a dual battery design (sold separately) loaded from a locking battery door located on the base of the device. The chassis is manufactured out of Zinc Alloy and features an ergonomic chassis split in three components, with two compartments dedicated to batteries and the other compartment dedicated to the refillable squonk bottle. Designed from the ground up with an emphasis on creating the most plug and play RDA experiences to date, the SUBDRIP RDA features one of the first truly replaceable drip coil systems on the market. The SUBDRIP utilizes fully swappable and prebuilt build decks that can be utilized as is or can be rebuilt and reconfigured by the user. Each deck, in conjunction with the SUBDRIP base as well as the DRIPMOD’s reservoir bottle, features a squonk ready configuration that feeds liquid into the deck by user applied pressure from the cutout located on the DRIPMOD. This function essentially allows users to effectively feed liquid into the deck when needed, supplied by the absolutely massive 7ml refillable reservoir bottle capacity. The Kanger DRIPBOX 160W Squonk Kit is the perfect combination of power, affordability, and ease of use, making it an essential all day vape system.


Product Features:

  • 160W Max Output
    • 7 to 160W Output Range
    • 0.1 ohm Minimum Atomizer Resistance
    • 0.1W Adjustment Increments
  • Temperature Control
    • Ni200 Nickel Support
    • Titanium Support
    • Stainless Steel Support
    • 0.05 ohm Minimum Atomizer Resistance
    • 200 to 600 degrees Fahrenheit
  • 7ml Capacity
    • Feeds from Bottle
    • ‘Squonk’ Action
      • Press to Feed into RDA Deck
      • Easy and Convenient
    • Dripper Experience with Tank Capacity
  • Locking Battery Door
    • Dual 18650 Battery Powered
  • Gold Plated Spring Loaded 510
  • Micro USB Charge Port
    • 1A Charging Port
    • Battery Charge Indicator
  • Low Battery/Short Circuit/Reverse Polarity/Overtime Protection

SUBDRIP Features:

  • 22mm Diameter
  • Swappable Build Decks
    • Two Post Design
      • 1.5mm Terminal
    • Dual Adjustable Airflow
      • 10mm by 1.5mm Airslots
    • 12mm Widebore Delrin Drip Tip
  • Stainless Steel Construction
  • Gold Plated Squonk Ready 510 Contact

Product Includes:

  • One Kanger DRIPBOX 160W Squonk Kit
  • Extra 7ml Squonk Bottle
  • Two Prebuilt 0.2 ohm SUBDRIP Build Decks
    • One Preinstalled
  • One Micro USB Charging Cable
  • One User Manual

Stop by and check out the Dripbox 160 at Voltage Vapin’!



Mile High

Please make sure you have your I.D. present when entering the store.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.

We still allow customers to bring their children in, as long as they are supervised by their parents.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, and ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

velocity v2