Tag: velocity v2

The Host of this Saturday’s Rebuild Class March 11th will be our very own Chris at Voltage Vapin’! (UPDATED)

The rebuild class will be from 2 to 4 PM, Saturday, March 11th, and hosted by Chris. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

class

classclassclassclass

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Velocity V2!

(Discontinued)

class

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor

Perfect your building techniques with the Velocity V2 from Voltage Vapin’!



Build in style with one of our Coil Master Mats!

class

The Coilmaster build mat is a great new addition to any builders arsenal and its made with great quality!. This Mat is great to protect you desk or table when you do your builds.It measures 33×15 Plenty of room for the beginner or advanced builder. When you are clipping those pesky leads, they actually stick to the mat instead of bouncing and flying everywhere!

Build like a pro on the Coil Master Build Mat from Voltage Vapin’!



class

Please make sure you have your I.D. present when entering the store and we are now required by law to I.D. anyone who appears to be 27 years of age or younger.

Voltage Vapin’ apologizes for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: class

The Host of this Saturday’s Rebuild Class February 25th will be our very own Chris at Voltage Vapin’!(Updated)

The rebuild class will be from 2 to 4 PM, Saturday, February 25th hosted by Chris. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

class

 

classclassclassclassclassclass

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Start your building journey with the…

Velocity V2

(Discontinued)

class

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor

Easy to build on and even easier to use; the Velocity V2 from Voltage Vapin’!



Not ready to try your hand at fancy coil building yet?

Demon Killer Coil Pack

class

Demon Killer Coils have landed at Voltage, and the crowd goes WILD!  The Demon Killer coil pack is an 8-in-1 set of sub ohm coils that are guaranteed to pack a punch!  Ranging from as high as 0.85 ohms all the way down to 0.36 ohms per single coil, the Demon Killer pack has some of the most wicked builds pre-wrapped, and ready to slip into your favorite RDA!

The styles include six of each of the following coils:

Twisted coil with a resistance of 0.45ohm

Hive coils with a resistance of 0.5ohm

Tiger coils with a resistance of 0.36ohm

Clapton coils with a resistance of 0.36ohm

Quad coils with a resistance of 0.36ohm

Fused clapton coils with a resistance of 0.45ohm

Alien clapton coils with a resistance of 0.45ohm

Flat twisted coils with a resistance of 0.36ohm

This set of Demon Killer coils is not for the beginner builder, please be safe, and use the appropriate parameters for your batteries, and for your device.

The Demon Killer pre-made coils, purchase the set at Voltage Vapin’ today!



class

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: class

Thanks to our very own Thor for teaching the Rebuild Class here at Voltage Vapin’! (UPDATED)

A big thanks goes to our very own Thor for teaching everyone to rebuild their coils at the Rebuild Class this Saturday!

class

class

classclassclass

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Thor taught a lot of people how to build their attys. The next rebuild class will be from 2pm-5pm, on February 4th.

Come hang out any Saturday for our free rebuild class to learn from some of the best. We cover how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you. However, we can teach you with step by step instructions during the Rebuild class.



 Class is in session with the Limitless Gold!

(DISCONTINUED)

class class

 

 

The Limitless Gold RDTA is the newest release from Limitless Mod Co. and is an upgraded version from the original Limitless RDTA but now comes with gold plated interchangeable decks for different builds (Available Soon) and a nice solid black color with deep Limitless engraving. With a 25mm base and a unique bottom airflow design, it’s hard to miss. It’s designed to shoot the air directly under your coils as well as the top with the Limitless triangles as your airflow slots. . The Limitless Gold RDTA has a wide variety of different post options for you to do different builds on.

Features and Specs:

  • Limitless Gold RDTA 25mm Base Deck
  • Intechangable Decks On Limitless Gold RDTA
  • Adjustable Airflow Control On Limitless Gold RDTA
  • Unique Bottom Airflow Directly Under the Coils

Stop in Voltage Vapin’ today to check out the latest and greatest from The Limitless Mod Co.!



Or you can start class with the Velocity V2!

(DISCONTINUED)

class

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin makes the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor


back

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



File under:

class

Thanks to our very own Kevin for teaching the Coil Building Class here at Voltage Vapin’!(Updated)

A big thanks goes to our very own Kevin for teaching everyone to rebuild their RDAs and rebuildable tanks at the Rebuild Class this Saturday!

class class class class class class

 

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Kevin taught a lot of people how to build their attys. The next rebuild class will be from 2pm-5pm, on December 31st (as to observe Christmas Eve, there will be no class on December 24th).

Come hang out any Saturday for our free rebuild class to learn from some of the best on how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions during the Rebuild class.



Be ready for our next class with the Mason Gemini RDA!

class

The Mason Gemini, also from the great folks at Vapergate, is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  The Mason Gemini is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow is designed in a double stacked air slot configuration along with the top cap option, which allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Top Slot
      • 8mm by 2mm
    • Bottom Slot
      • 8mm by 3mm
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction
  • Threaded Delrin 510 Heat Sink
    • 10mm Stainless Steel Widebore Drip Tip
    • 10mm Delrin Widebore Drip Tip
  • Copper 510 Connection

The Mason Gemini is the next level of RDA awesomeness so make it yours at Voltage Vapin’!



Or you can start class with the Velocity V2!

(Discontinued)

class

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor


three

 Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



File under:

class

Oldie but goodie mods are at Voltage Vapin’ for some fantastic prices! (while supplies last) (UPDATED)

Don’t Forget we still have some crazy deals on some oldie but goodie mods from small business saturday!

This year, we’ve got some great doorbuster deals lined up on some oldie but goodie mods that have been favorites of our employees and customer alike.  Whether you’re trying to make the transition from traditional tobacco or you’re a veteran vaper looking for a second (or third!) mods, we’ve got something for everyone!  Just remember, these babies are sure to go fast and are available in limited quantities on a first come, first served basis!

  • Firebeard 60W Box Mods for $29.99*

    (DISCONTINUED)

    mods

  • Laisimo L1 200W TC Box Mods for $49.99*

    (DISCONTINUED)

    mods

  • Reuleaux RX200 Box Mods for $49.99* (excludes Black and Black and Red RX200)

    (DISCONTINUED)

    mods

  • Sigelei T150 Touch Screen Box Mods for $49.99*

    (DISCONTINUED)

    mods

  • Pioneer4You IPV3 Box Mods for $49.99*

    (DISCONTINUED)

    mods

  • Pioneer4You IPV4 Box Mods for $54.99*

    (DISCONTINUED)

    mods

    *not to be combined with any other offer or discount*



Want a new dripper that is perfect for some of these mods on sale?

Velocity V2

(DISCONTINUED)

mods

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor


Even the Big Baby tank is perfect for them too!

Smok TFV8 Big Babymods

Smok does it again and improves one of their previous tanks! The Big Baby brings to you a larger e-liquid capacity of 5ml’s up from 3 but get this, the same coils from the original Baby Beast can be used with the new one, plus it comes with an RBA section so you can make your own coils! It come with 2 replacement glass pieces, 2 coils ( .15 ohm quad coil and 0.2 ohm sextuple coil), Rba section, vape bands, and cotton so they give you the full set with having to worry about buying new coils when purchased! The vapor and flavor production are second to none with this tank and now you don’t have to worry about filling it as often!

  • 0.15 Ohm quad coi
  • 0.2 Ohm Sextuple coil
  • Rba section
  • 5ml liquid capacity
  • Extra O-rings
  • vape bands
  • 2 replacement glass

Stop by Voltage Vapin’ and check out our huge selection of the best Smok products!



mods

 Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

mod

Thanks to our very own Kevin for teaching the Rebuild Class here at Voltage Vapin’! (UPDATED)

A big thanks goes to our very own Kevin for teaching everyone to rebuild their RDAs and rebuildable tanks at the Rebuild Class this Saturday!

class class class class class

 

 

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Kevin taught a lot of people how to build their attys. The next rebuild class will be from 2pm-5pm, on November 26th.

Come hang out any Saturday for our free rebuild class to learn from some of the best on how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions during the Rebuild class.



Practice some builds on the…

Velocity V2

(DISCONTINUED)

class

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor


Looking for a small dripper to build on?

Mini Royal Hunter RDA

(DISCONTINUED)

class

The Royal Hunter Mini RDA by Council of Vapor is the evolution of the extremely popular Royal Hunter, packing in the full featured foundation of the original in a short and compact profile. Featuring a triple slotted airflow coupled with three 2mm airholes, the Royal Hunter Mini has tremendous airflow capacity while also being fully adjustable for dual coil purposes. The build deck features the squared PEEK insulators alongside deck milled negatives and a dual split positive post, with each posthole measuring 2mm to accommodate a wide variety of coil configurations. The honeycomb design has been improved, directly integrated into the 13mm wide competition bore delrin drip top, with white and black variations included with each set. This effect greatly increases turbulence in airflow, and with the shortened stature of the Mini, produces outstanding flavor and vapor while simultaneously minimizing spitback due to the inherent design. The Royal Hunter Mini also features the same visually stunning engraving on the base of the atomizer along with a Royal Hunter Mini engraving on the face of the RDA.

Product Features:

  • 22mm Diameter
  • 22mm Overall Height
  • Triple Slotted Airflow
    • Stacked
    • 8mm Wide
  • Triple 2mm Airholes
  • Fully Adjustable Airflow
  • Dual Split Positive Post
  • Deck Milled Negatives
  • 2mm Post Holes
  • Silver Plated Contact
  • Delrin Honeycomb 13mm Widebore Drip Top
    • White and Black Included
    • Removable and Easily Interchangeable
  • Silver Plated Contact
  • The Council of Vapor Engraving


class

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

class