Tag: squonk velocity

The Host of this Saturday’s Rebuild Class March 11th will be our very own Chris at Voltage Vapin’! (UPDATED)

The rebuild class will be from 2 to 4 PM, Saturday, March 11th, and hosted by Chris. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

class

classclassclassclass

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Velocity V2!

(Discontinued)

class

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor

Perfect your building techniques with the Velocity V2 from Voltage Vapin’!



Build in style with one of our Coil Master Mats!

class

The Coilmaster build mat is a great new addition to any builders arsenal and its made with great quality!. This Mat is great to protect you desk or table when you do your builds.It measures 33×15 Plenty of room for the beginner or advanced builder. When you are clipping those pesky leads, they actually stick to the mat instead of bouncing and flying everywhere!

Build like a pro on the Coil Master Build Mat from Voltage Vapin’!



class

Please make sure you have your I.D. present when entering the store and we are now required by law to I.D. anyone who appears to be 27 years of age or younger.

Voltage Vapin’ apologizes for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: class

Thanks to our very own Kevin for teaching the Coil Building Class here at Voltage Vapin’!(Updated)

A big thanks goes to our very own Kevin for teaching everyone to rebuild their RDAs and rebuildable tanks at the Rebuild Class this Saturday!

class class class class class class

 

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Kevin taught a lot of people how to build their attys. The next rebuild class will be from 2pm-5pm, on December 31st (as to observe Christmas Eve, there will be no class on December 24th).

Come hang out any Saturday for our free rebuild class to learn from some of the best on how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions during the Rebuild class.



Be ready for our next class with the Mason Gemini RDA!

class

The Mason Gemini, also from the great folks at Vapergate, is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  The Mason Gemini is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow is designed in a double stacked air slot configuration along with the top cap option, which allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Top Slot
      • 8mm by 2mm
    • Bottom Slot
      • 8mm by 3mm
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction
  • Threaded Delrin 510 Heat Sink
    • 10mm Stainless Steel Widebore Drip Tip
    • 10mm Delrin Widebore Drip Tip
  • Copper 510 Connection

The Mason Gemini is the next level of RDA awesomeness so make it yours at Voltage Vapin’!



Or you can start class with the Velocity V2!

(Discontinued)

class

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor


three

 Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



File under:

class

They’re BAAAAACK… in stock at Voltage Vapin’! (UPDATED)

We have items back in stock here at Voltage Vapin’, and we can’t wait to tell you all about it!

Items like… the Pangu Tank!

(DISCONTINUED)

stock

The Pangu Tank is Back in stock!

The Kangertech Pangu Tank has a cool, unique coil design where the coils are the whole the chimney device but the coil itself is at the bottom of the chimney so there is no need to worry about spitback while still getting that crazy good flavor that chimney coils are known for. It utilizes the ever so popular SSOCC 0.5 ohm coil by kangertech but is a different set of coils due the chimney being part of it. What is new about the pangu tank is that it also has liquid flow control with a no leak design where you can change the coil without draining your liquid as well as it being a top fill tank.

  • Holds 3.5ml’s of liquid
  • Unique Chimney Coil design
  • Top Fill
  • SSOCC 0.5 ohm coil
  • Nichrome 1.5 ohm coils
  • Liquid flow control valve
  • Can Replace the coil with a full tank
  • 22mm tank
  • 2 airflow slots with adjustments

The New Kangertech Pangu tank, Great for on the go with a surprising hit now at Voltage Vapin’!



Also back in stock… the Velocity V2 in Blue!

(DISCONTINUED)

stock

The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.

Features and Specifications:

  • 22mm Diameter
  • 304 Grade Stainless Steel
  • 5.5mm Deep Juice Well
  • 3mm Shorter Profile
  • Reduced Chamber
  • Thicker Top Cap
  • Cap Alignment Registration Marks
  • Top Cap Locking Tab
  • Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
  • Two Post Design
    • Hex Screws
    • PEEK Insulator
    • Thicker Negative/Positive Posts
    • Larger Post Holes
  • More Efficient Indirect Airhole Placement
  • Dual Adjustable 2mm by 8mm Horizontal Slots
  • Six Adjustable 2mm Indirect Airholes
  • Delrin 12mm Widebore Drip Tip
  • Delrin 510 Drip Tip Adaptor

The Velocity V2 in Blue… get ’em at Voltage before they’re out of stock again!



This one goes out the the Crunk lovers… Cap’n Crunk is now available in

120ml!

stock

At Voltage Vapin’, you can find at least 4 employees that swear by Cap’n Crunk.  It’s delicious buttery vanilla flavor is ridiculously good, just like the name it’s based off of.  Well now you can rejoice… the Cap’n has made it’s way into the big league… and is now available at 120 ml for the 3 mg/ml nicotine level!

We know there are more users of Cap’n Crunk that vape 0 mg all the way up to 12 mg.  Don’t worry, if you want the same 120 ml that everyone else gets to enjoy, we also offer the equivalent amount of e-liquid for the big bottle price!

New to Voltage, the Cap’n Crunk in 120 ml!  You know it, you love it, and now you can get a lot of it at one time!



stock

 Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



File under:

stock