Tag: rebuild

The Host of this Saturday’s Rebuild Class May 20th will be our very own Thor at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, May 20th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

Thor

classclassclassclass

 

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Mason Gemini!

Vapergate Mason Gemini 30mm RDA

mason gemini

The Mason Gemini is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  It is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow has a dual air slot configuration along with the top cap option that allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Top Slot
      • 8mm by 2mm
    • Bottom Slot
      • 8mm by 3mm
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction
  • Threaded Delrin 510 Heat Sink
    • 10mm Stainless Steel Widebore Drip Tip
    • 10mm Delrin Widebore Drip Tip
  • Copper 510 Connection

The Mason Gemini is the next level of RDA awesomeness so make it yours at Voltage Vapin’!



Every builder needs a build kit!

Kaos V2 Build Kit

kaos build kit

Whether you’re an experienced builder or just starting out, the Kaos V2 Buld Kit is a must have!  Designed by builders for builders, it contains over 25 high quality tools to assist you in making anything from simple coils to the most extravagant of builds!  A durable, reinforced case, makes keeping all of your tools in one place a snap!

You Will Receive:

  • Needle nose pliers
  • Cutter pliers
  • Ceramic Tweezers
  • Pen Style Screwdriver kit
  •  Stainless Steel Tweezers
  • Hex key kit
  • Container for cotton squares
  • Container for prebuilt coils
  • Angled Wire cutter
  • Ohm Meter
  • Stainless steel scissors
  • Coiling Kit

A builders’ dream come true, stop in Voltage Vapin’ today to get your Kaos V2 Build Kit!



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The host of this Saturday’s Rebuild Class April 22nd will be Chris Moore at Voltage Vapin’!

You may know Chris as Chris Mohm from many popular vape forums.  The rebuild class will be from 2 to 4 PM on Saturday, April 22nd. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

chris moore

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Calypso!

Alpha Ohmega Calypso RTA

calypso

The Ohmega Calypso is an impressive new tank that yields the old genitank style. You can set up the Calypso for use with single or dual coils, with a PMMA plug that does not detract from the barrel airflow. The Calypso includes many accessories to really get the most out of your new RTA and to personalize it as much as possible.

Features:

  • 30mm RTA
  • Built by Ohmega
  • Solid SS construction
  • Genesis-style atomizer
  • Single or dual coil setup available
  • Four-post deck with PEEK insulator
  • Copper 510 adjustable positive pin
  • Glass or SS tank section
  • Wide bore Chuff top or add your own drip tip with SS top cap
  • 2.8mm lead holes
  • Beefy Philips head post screws

The Ohmega Calypso, get it, wick it, fill it, vape it! Available now at Voltage Vapin’!



Do you want to start building but you’re on a budget?

wirebacon

You don’t need to spend a fortune on expensive gear to start building. Come see us for all your coil building needs.



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The Host of this Saturday’s Rebuild Class March 25th will be Johnnie Owens at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, March 25th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

class johnnie

class johnnieclass johnnieclass johnnieclass johnnie

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Ohmega Calypso!

calypso

The Ohmega Calypso is a 30mm tank that uses the old geni-tank style where the wick is dropped into the liquid and draws up to the coils.  You can also set up the Calypso for use with single or dual coils. Three 7mm slits are found on both sides of the barrel, for a total of 42mm of airflow. The Calypso includes many accessories to really get the most out of your new RTA and to personalize it as much as possible.

Features:

  • 30mm RTA
  • Built by Ohmega
  • Solid SS construction
  • Genesis-style atomizer
  • Single or dual coil setup available
  • Four-post deck with PEEK insulator
  • Copper 510 adjustable positive pin
  • Glass or SS tank section
  • Wide bore Chuff top or add your own drip tip with SS top cap
  • 2.8mm lead holes
  • Beefy Philips head post screws

The Ohmega Calypso, get it, build it, wick it, fill it, vape it! Available at Voltage Vapin’!



Build like a pro with the Coil Master Kit!

rebuild kit

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries!

Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



voltage

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: rebuild class

Thanks to our very own Thor for teaching the Rebuild Class here at Voltage Vapin’!

A big thanks goes to our very own Thor for teaching everyone to rebuild their coils at the Rebuild Class this Saturday!

classclassclassclass

 

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Thor taught a lot of people how to build their attys. The next rebuild class will be from 2pm-4pm, on April 1st.

Come hang out any Saturday for our free rebuild class to learn from some of the best. We cover how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you. However, we can teach you with step by step instructions during the Rebuild class.



Learn to build on the Alliance V2+!

alliance

Remember the Mutation X234? Take that and mix it with the Mason RDA and what pops out? The Alliance V2+! This guy is a 22mm dripper with so many options for how you want to vape that your mind will flip! It is a 4 post style build deck but what’s really unique is the different kinds of caps and accessories it comes with like different slam caps and even a condenser, or how about  a removable 510 heatsink. With all of the heatsinks in this one you won’t ever have to worry your rda or mod getting even with some of the most extreme builds!

  • 22mm design
  • square 4 post
  • removable 510 heatsink
  • mutation style slam cap
  • flavor slam cap
  • condenser
  • removable air flow control
  • comes with 24g nichrome and cotton bacon

Make your dripping experience a great one with Alliance V2+ by Vapergate from Voltage Vapin’!



Looking for and RDTA with lots of different options?

iJoy Combo RDTA

From the good people at iJoy comes the iJoy Combo RDA/RDTA! This one is iJoy’s version of an RDTA tank. The iJoy Combo includes a base, two interchangeable decks and a premade coil, all of which can be used in either configuration!

Features:

  •  0.3ohm pre-made coil (40-80w)
  •  6.5ML tank reservoir
  •  20.5mm building deck
  •  25mm diameter
  •  53mm height
  • 20.5mm building deck
  • 25mm Diameter
  • 53mm Height
  • Side Filling System

The iJoy Combo is a perfect RDTA for learning to rebuild on and we have the IMC replacement coils in stock so until you can still use it until you get hang of building!

Check out iJoy’s version of an RDTA, available at Voltage Vapin’!



voltage

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: rebuild class

Thanks to our very own Scott for teaching the Rebuild Class here at Voltage Vapin’!

A big thank you goes out to our very own Scott for teaching everyone to rebuild their RDAs and Rebuildable Tanks at the Rebuild Class this Saturday!

Rebuild ClassRebuild ClassRebuild ClassRebuild ClassRebuild ClassRebuild Class

 

We had a great turnout again for the rebuild class this Saturday.  Everyone had a great time and Scott taught a lot of people how to build their attys. The next rebuild class will be at 2pm-5pm April 2nd.

Come hang out any Saturday for our free rebuild class to learn from some of the best on how to build coils, battery safety and anything you would like to know about vaping!



The Mini-Volt and Royal Hunter Combo

Council of Vapor

The Council of Vapor Mini Volt 40W Box Mod is one of the smallest mid wattage output devices ever released, featuring 5 to 40W of output power and a 1300 mAh battery, a 0.2 ohm minimum resistance rating, three selectable wattage curves, and a two line OLED display. This allows the Mini Volt to effectively power many of today’s premiere compact and midwattage Sub-Ohm Tanks while remaining small enough to completely enclose in one hand. The chipset also features three adjustable power curves corresponding to ramp time, allowing users more precisely tune experience. The 1300 mAh battery provides great range for the size of the device, making it a perfect device to take on a night out or on short commutes. The chassis features a rubberized coating that provides a comfortable grip and feel, with carbon fiber accenting to provide a stylish visual contrast. With a remarkably small form factor, ample power and range, and a well built chassis, the Council of Vapor Mini Volt 40W Box Mod makes for the perfect side carry.

Product Features:

  • 5 to 40W
    • 0.2 ohm Minimum Atomizer Resistance
    • Adjustable in 0.1W increments
  • Three Selectable Output Modes
  • 1300 mAh Battery
    • Chargeable Via Micro USB Port
  • Ultra Compact Form Factor
    • 35mm by 22mm by 56mm
  • OLED Display Screen
    • Three Line Display
    • Output
    • Atomizer Resistance
    • Battery Life Indicator
  • Carbon Fiber Wrap
  • Rubberized Finish
  • Spring Loaded 510 Connection

Royal Hunter Mini RDA by The Council of Vapor

 

The Royal Hunter Mini RDA by Council of Vapor is the evolution of the extremely popular Royal Hunter, packing in the full featured foundation of the original in a short and compact profile. Featuring a triple slotted airflow coupled with three 2mm airholes, the Royal Hunter Mini has tremendous airflow capacity while also being fully adjustable for dual coil purposes, and is very easy to rebuild. The build deck features the squared PEEK insulators alongside deck milled negatives and a dual split positive post, with each posthole measuring 2mm to accommodate a wide variety of coil configurations. The honeycomb design has been improved, directly integrated into the 13mm wide competition bore delrin drip top, with white and black variations included with each set. This effect greatly increases turbulence in airflow, and with the shortened stature of the Mini, produces outstanding flavor and vapor while simultaneously minimizing spitback due to the inherent design. The Royal Hunter Mini also features the same visually stunning engraving on the base of the atomizer along with a Royal Hunter Mini engraving on the face of the RDA.

Product Features:

  • 22mm Diameter
  • 22mm Overall Height
  • Triple Slotted Airflow
    • Stacked
    • 8mm Wide
  • Triple 2mm Airholes
  • Fully Adjustable Airflow
  • Dual Split Positive Post
  • Deck Milled Negatives
  • 2mm Post Holes
  • Silver Plated Contact
  • Delrin Honeycomb 13mm Widebore Drip Top
    • White and Black Included
    • Removable and Easily Interchangeable
  • Silver Plated Contact
  • The Council of Vapor Engraving

Come by and check this Awesome new setup by Council of Vapor only here at Voltage Vapin’!



Check out the Lush RDA by Wotofo!

RX200 Reuleaux

The Lush RDA by Wotofo is a rebuildable dripping atomizer designed specifically to induce the most cyclonic and turbulent airflow possible, with six angular drilled airflow holes on each side, airflow control that can be adjusted to throttle airflow vertically or horizontally, a 10mm deep juice well, as well as a versatile split positive build deck. The Lush’s airflow features six 2mm airflow holes on each side, with each vertical pair drilled in increasing angles to create a cyclonic effect within the deck chamber. This in turn creatures a unique vaping experience that ups the ante in overall flavor and vapor experience. The airflow control features a uniquely designed inner sleeve that, when adjusted in a specific direction, either vertically throttles or horizontally throttles the airflow, allowing users to configure desired airflow specifically with coil configurations and vape experiences. The deck features an enormous 10mm deep juice well, with milled cutaway negative posts that drastically increase wicking and dripping area, while the dual split positive post makes coil compatibility simple and easy. Each post hole measures at 2mm to accommodate low gauge wire builds, while the squared PEEK insulator increases heat resistance and minimizes the chances of your center post turning. Manufactured out of high quality Stainless Steel with a silver plated copper contact, the Lush RDA is a workhorse atomizer that has ample and effective airflow, an extremely well rounded building deck, and the option for standard 510 drip tips or use with the included 12mm chuff cap for maximum airflow.

Product Features:

  • 22mm Diameter
  • Angular Drilled Airflow
    • Six Airflow Holes Each Side
    • 2mm Each Airhole
    • Greatly Increases Cyclonic Effect
  • Specially Designed Airflow Control
    • Airflow Can Be Throttled Vertically or Horizontally
  • 10mm Deep Juice Well
  • Deckmilled Cutaway Negative Posts
  • Dual Split Positive Post
    • Squared PEEK Insulator
  • 2mm Post Holes
  • Silver Plated Copper Contact
  • 12mm Black Delrin Competition Drip Top
  • 510 Adapter with Stainless Steel 510 Drip Tip
  • CNC Engraved Lush Logo
  • High Grade Stainless Steel Construction
  • Individually Serialized

Product Includes

  • Lush RDA
  • 12mm Black Delrin Competition Drip Top
  • O-Rings (must be assembled prior to use)

While you’re in for the rebuild class, don’t forget to check out all of the other great sales we have going on!



 

RX200 Reuleaux

Please make sure you have your I.D. present when entering the store.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.

We still allow customers to bring their children in, as long as they are supervised by their parents.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, and ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



 

file under:

rebuild class

 

Thanks to our very own Kevin for teaching the Rebuild class here @ Voltage Vapin’!

A big thank you goes out to our very own Kevin for teaching everyone to rebuild their RDAs and Rebuildable Tanks at the Rebuild Class this Saturday!

rebuild classrebuild classrebuild classrebuild classrebuild classrebuild class

We had a great turnout again for the rebuild class this Saturday.  Everyone had a great time and Kevin taught a lot of people how to build their attys. The next rebuild class will be at 2pm-6pm December 5th.

Come hang out any Saturday for our free rebuild class to learn from some of the best on how to build coils, battery safety and anything you would like to know about vaping!



Come by and Check Out the SVD 2.0!

rebuild class 

 

Don’t miss out on a chance to pick up and SVD 2.0! Supplies are limited!

The SVD2.0 is the first and only Advanced Personal Vaporizer to run on the power and precision of the Evolv Experience™Microchip. Evolv has worked closely with Innokin to create a board which is unlike any other. With a maximum output of 20 watts and a minimum resistance of .5ohm the SVD2.0 also stands apart from other high end advanced personal vaporizers with the introduction of Evolv ‘Step Down Technology’, advanced new functions and new intuitive Innokin safety features.

This Product Features:

  • Variable Wattage: Wattage (5.0 – 20.0W in .1 watts increments)
  • Lock the selected Wattage
  • Short Circuit/Atomizer Protection (0.5 Ohm).
  • Battery Checker
  • Overheat Protection.
  • Reverse Polarity Protection.

**The iTaste SVD2.0 cannot use 2 stacked batteries and any other types of batteries may damage your iTaste SVD2.0.**

You Will Receive:

  • 1x – iTaste SVD 2.0
  • 1x – 510 connector
  • 1x – eGo thread adaptor
  • 1x – 18650 battery tube
  • 1x – 18350 battery tube
  • 1x – iTaste SVD2.0 Travel Case with Battery Power level checker


Triton Lattice Replacement Tanks

rebuild class

The Triton Lattice Replacement Tank is designed to add a touch of class and elegance to the appearance of your device. It is masterfully and artistically crafted with an intricate pattern that is extremely striking. Regardless of the battery used with the Triton Tank, this Lattice Tank is sure to add a level of sophistication to your setup.

Aspire Triton Hollowed-Out Sleeve Specifications:

Shell Material: Stainless Steel

Tank Material: Pyrex Glass

E-Liquid Capacity: 3.5 ml

Compatible With: Aspire Triton Tank

 

Subox Mini Multicolored Skins

rebuild class

Are you lacking a bit of protection, or even just looking to add a bit of flair to your device? You might need to stop by and check out the new Kanger Subox Multicolored Skins! Made out of 100% High Quality Silicone, these sleeves are sure to add protection to your device, as well as peace of mind to the vaper who can’t afford to replace their device if they drop it. These skins come in a variety of colors, so there’s something for everyone! Don’t miss your chance to snag one of these while we still have them in stock!



file under:

rebuild class