Tag: Rebuild Kits

The Host of this Saturday’s Rebuild Class May 20th will be our very own Thor at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, May 20th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

Thor

classclassclassclass

 

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Mason Gemini!

Vapergate Mason Gemini 30mm RDA

mason gemini

The Mason Gemini is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  It is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow has a dual air slot configuration along with the top cap option that allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Top Slot
      • 8mm by 2mm
    • Bottom Slot
      • 8mm by 3mm
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction
  • Threaded Delrin 510 Heat Sink
    • 10mm Stainless Steel Widebore Drip Tip
    • 10mm Delrin Widebore Drip Tip
  • Copper 510 Connection

The Mason Gemini is the next level of RDA awesomeness so make it yours at Voltage Vapin’!



Every builder needs a build kit!

Kaos V2 Build Kit

kaos build kit

Whether you’re an experienced builder or just starting out, the Kaos V2 Buld Kit is a must have!  Designed by builders for builders, it contains over 25 high quality tools to assist you in making anything from simple coils to the most extravagant of builds!  A durable, reinforced case, makes keeping all of your tools in one place a snap!

You Will Receive:

  • Needle nose pliers
  • Cutter pliers
  • Ceramic Tweezers
  • Pen Style Screwdriver kit
  •  Stainless Steel Tweezers
  • Hex key kit
  • Container for cotton squares
  • Container for prebuilt coils
  • Angled Wire cutter
  • Ohm Meter
  • Stainless steel scissors
  • Coiling Kit

A builders’ dream come true, stop in Voltage Vapin’ today to get your Kaos V2 Build Kit!



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The host of this Saturday’s Rebuild Class April 22nd will be Chris Moore at Voltage Vapin’!

You may know Chris as Chris Mohm from many popular vape forums.  The rebuild class will be from 2 to 4 PM on Saturday, April 22nd. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

chris moore

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Calypso!

Alpha Ohmega Calypso RTA

calypso

The Ohmega Calypso is an impressive new tank that yields the old genitank style. You can set up the Calypso for use with single or dual coils, with a PMMA plug that does not detract from the barrel airflow. The Calypso includes many accessories to really get the most out of your new RTA and to personalize it as much as possible.

Features:

  • 30mm RTA
  • Built by Ohmega
  • Solid SS construction
  • Genesis-style atomizer
  • Single or dual coil setup available
  • Four-post deck with PEEK insulator
  • Copper 510 adjustable positive pin
  • Glass or SS tank section
  • Wide bore Chuff top or add your own drip tip with SS top cap
  • 2.8mm lead holes
  • Beefy Philips head post screws

The Ohmega Calypso, get it, wick it, fill it, vape it! Available now at Voltage Vapin’!



Do you want to start building but you’re on a budget?

wirebacon

You don’t need to spend a fortune on expensive gear to start building. Come see us for all your coil building needs.



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The Host of this Saturday’s Rebuild Class April 15th will be our very own Skyler at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, April 15th, and hosted by Skyler. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

build class

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Pharaoh RTA!

pharaoh rta

The Pharaoh RTA is the latest atomizer designed by the world famous RiP Trippers in conjunction with Digiflavor. Measuring 25mm at it’s base and expanding to 27mm at the widest point, the Pharaoh RTA’s body features a streamlined design. In addition, the Pharaoh features a tank capacity of 4.6ml and when installed with the included expansion tube, can be expanded an additional 3ml in capacity. The Pharaoh RTA’s build deck features a two post spring loaded clamp style configuration primarily intended for single coil builds. The Pharaoh RTA features one of the most dynamic airflow systems available today, with two independently adjustable airflow systems located at the top and at the bottom of the chassis. The top airflow system features dual 2mm diameter airholes that lead directly down into the build chamber, providing smooth and direct airflow. The bottom airflow system features large dual airslots that utilizes a click-to-set system with five different airflow settings ranging from fully open to fully closed. Offering one of the best and most complete systems presented, the RiP Trippers Pharaoh RTA enters the market as the most feature packed RTA available today.

Product Features:

  • 27mm Diameter at Widest Point
    • 25mm at Base
  • Expandable Juice Reservoir
  • Full Shelf Styled Two Post Build Deck
  • Top and Bottom Dual Adjustable Airflow
    • 15mm by 2mm Each Bottom Airslot
    • 2mm Diameter Each Top Airhole
  • 10mm Bore Delrin Drip Cap
    • Delrin Insert
  • Delrin 510 Drip Tip Adapter
  • PEEK Insulators
  • Gold Plated 510 Contact

Get your Rip Trippers Signature RTA today! Now in stock at Voltage Vapin’!

 



Build like a pro with the Coil Master Build Kit!

coil master build kit

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries! This kit goes above and beyond, so far that you’ll miss it if you don’t check it out soon!

Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



build class

 Please make sure you have your I.D. present when entering the store. The law now requires us to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The Host of this Saturday’s Rebuild Class March 25th will be Johnnie Owens at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, March 25th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

class johnnie

class johnnieclass johnnieclass johnnieclass johnnie

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Ohmega Calypso!

calypso

The Ohmega Calypso is a 30mm tank that uses the old geni-tank style where the wick is dropped into the liquid and draws up to the coils.  You can also set up the Calypso for use with single or dual coils. Three 7mm slits are found on both sides of the barrel, for a total of 42mm of airflow. The Calypso includes many accessories to really get the most out of your new RTA and to personalize it as much as possible.

Features:

  • 30mm RTA
  • Built by Ohmega
  • Solid SS construction
  • Genesis-style atomizer
  • Single or dual coil setup available
  • Four-post deck with PEEK insulator
  • Copper 510 adjustable positive pin
  • Glass or SS tank section
  • Wide bore Chuff top or add your own drip tip with SS top cap
  • 2.8mm lead holes
  • Beefy Philips head post screws

The Ohmega Calypso, get it, build it, wick it, fill it, vape it! Available at Voltage Vapin’!



Build like a pro with the Coil Master Kit!

rebuild kit

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries!

Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



voltage

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: rebuild class

The Host of this Saturday’s Rebuild Class October 15th will be our very own Thor!

The rebuild class will be from 2 to 5 PM, Saturday, October 15th hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

rebuild class

 

rebuild classrebuild classrebuild classrebuild classrebuild class

 

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



 

Ijoy Limitless Plus

RDTA

iJoy Limitless Plus Two Post RDTA

The iJoy x Limitless Plus Two Post RDTA builds upon the critically acclaimed Limitless RDTA build deck, and by expanding tank diameter to 25mm, increases tank capacity to an incredible 6.3ml, increasing terminal diameter to 2.5mm each, and improving upon workable build deck space and capability. The Limitless Plus features a two post, dual terminal build deck with each terminal diameter measuring 2.5mm, with a combination of side and top mounted hardened screws allowing for larger thread points and more secure attachment. The gold plated positive post and 510 connection ensures great conductivity, with the positive post fully secured and insulated with PEEK. The acclaimed side fill system from the original has returned, featuring a single 10mm by 3.5mm port positioned between the two deck o-rings providing excellent ergonomics and sealing. Combined with the benchmark setting wicking assembly, in which the users can quickly unthread the mid section of the tank for access into the reservoir itself, the Limitless Plus offers incredible ease of use. Airflow of the Limitless Plus features dual 15mm by 1.5mm airslots throttled via the knurled top cap, with each system including a single coil plug, allowing users to configure more flavor centric coils. Manufactured out quality stainless steel and glass, the Limitless Plus features incredibly high quality paisley engravings, presenting a timeless and striking aesthetic. The iJoy Limitless Plus Two Post RDTA features across the board upgrades to a highly reviewed platform making it a must buy for all build enthusiasts.

Product Features:

  • 25mm Diameter
  • Upgraded Two Post Build Deck
    • Dual Terminal Per Post
      • 2.5mm Diameter Terminals
      • Side and Top Mounted Philips Screws
      • 11mm Post Distance
    • Dual Coil Compatible
    • PEEK Insulation
    • Quad Wicking Ports
      • Sidewall Cutouts
    • Gold Plated Positive
    • Hardened Screws
    • Single Coil Adapter
  • Threaded Mid Section
    • Access Into Tank
    • Easily Wicked System
    • Threaded onto Build Deck
  • Innovative Side Fill
    • Fill Port Positioned Centrally Between Top Cap O-Rings
    • Sealed When Assembled
    • 10mm by 3.5mm
    • 6.3ml Tank Capacity
      • All Day Vape Capacity
  • Dual Slotted Direct Airflow
    • 15mm by 1.5mm Airslot
    • Adjustable via Drip Cap
    • Direct to Coil
    • Knurled Top Cap
  • Adjustable Gold Plated 510
  • Stainless Steel and Glass Construction

Put this hot new genesis style tank in your hands today at Voltage Vapin’!



 Make rebuild class a breeze with the Coil Master Rebuild Kit!

rebuild class

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries! This kit goes above and beyond, so far that you’ll miss it if you don’t check it out soon! Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



rebuild class

 Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



File under:

Rebuild Class

 

Our Mile High Contest is still continuing at Voltage Vapin’!!

We will be giving away a 120ml bottle of e-liquid on Friday, March 25th, 2016! When you come in and buy a bottle of Mile High, and your purchase is $100 or over, you are automatically entered into the Mile High Contest!!

Here’s the best part, the price is $14.95 for a 30ml Bottle!

Contest

Mile High Drip is one of the hottest new Dripping E-liquid companies out now.

Focusing on natural extracts in “VG Rich” blends with no artificial dyes, diacetyl/diketones, or sucralose.  Mile High drip blends offer flavors that pop, but remain “oh so smooth” on sub-ohm builds with unique blends that you won’t find in any other lines.

Mile High Drip was voted Best Drip In Denver! 

We currently carry:

Nanner -The smoothest banana flavor you have ever tasted. Subtle fruits layered under banana yum, with a hint of Citrus Pop.

Sinful – A Bakery Danish blend profile, that is sinfully addictive! Need we say more?

JaMakin’ Clouds – Mango Creme with a contrasting sweet fruit on the exhale.

Crack Loopz Our most layered flavor blend to date! Most say it is spot on “Fruit Loops”, focusing on the Orange & Lemon loops. Others say it’s the most addicting ADV they have ever had! Hence the name “Crack Loops”.



 

And while you are here…

Check out the Coil Master products here at Voltage Vapin’

Coil Master Rebuild Kit

tickets

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries! This kit goes above and beyond, so far that you’ll miss it if you don’t check it out soon! Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!

Coil Master Mats

tickets

The Coilmaster build mat is a great new addition to any builders arsenal and its made with great quality!. This Mat is great to protect you desk or table when you do your builds.It measures 33×15 Plenty of room for the beginner or advanced builder. When you are clipping those pesky leads, they actually stick to the mat instead of bouncing and flying everywhere!

Coil Master 521 Tab

ticketstickets

Multi-functional device designed for both do it yourself starters and advanced users, Coilmaster 521 Tab help insures you that you are not building a dangerous coil for the mod you are using.

Features:

  • Ohm meter
  • Voltage meter for Mec. MOD/Regulated MOD
  • Coil rebuilding deck
  • Coil burning
  • Table MOD
  • Reverse battery protection
  • OLED screen

Specifications:

  • Resistance Measuring Range: 0.01 – 9.99 ohm
  • Voltage Measuring Range: 0.3 – 9.99 Volt
  • Resistance rate: As low to 0.2 ohm
  •  Connection : 510 threaded with spring loaded pin
  • Charging: 4.5V/ 750mah Micro-USB Charging input


rebuild class

Please make sure you have your I.D. present when entering the store.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.

We still allow customers to bring their children in, as long as they are supervised by their parents.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, and ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



 

File under:

Mile High