Tag: Re Buildable

The Host of this Saturday’s Rebuild Class May 20th will be our very own Thor at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, May 20th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

Thor

classclassclassclass

 

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Mason Gemini!

Vapergate Mason Gemini 30mm RDA

mason gemini

The Mason Gemini is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  It is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow has a dual air slot configuration along with the top cap option that allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Top Slot
      • 8mm by 2mm
    • Bottom Slot
      • 8mm by 3mm
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction
  • Threaded Delrin 510 Heat Sink
    • 10mm Stainless Steel Widebore Drip Tip
    • 10mm Delrin Widebore Drip Tip
  • Copper 510 Connection

The Mason Gemini is the next level of RDA awesomeness so make it yours at Voltage Vapin’!



Every builder needs a build kit!

Kaos V2 Build Kit

kaos build kit

Whether you’re an experienced builder or just starting out, the Kaos V2 Buld Kit is a must have!  Designed by builders for builders, it contains over 25 high quality tools to assist you in making anything from simple coils to the most extravagant of builds!  A durable, reinforced case, makes keeping all of your tools in one place a snap!

You Will Receive:

  • Needle nose pliers
  • Cutter pliers
  • Ceramic Tweezers
  • Pen Style Screwdriver kit
  •  Stainless Steel Tweezers
  • Hex key kit
  • Container for cotton squares
  • Container for prebuilt coils
  • Angled Wire cutter
  • Ohm Meter
  • Stainless steel scissors
  • Coiling Kit

A builders’ dream come true, stop in Voltage Vapin’ today to get your Kaos V2 Build Kit!



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

New Products in stock at Voltage Vapin’! – RDA’s, Box Mods & More! (UPDATED)

New Products in at Voltage Vapin’!!  New box mod, tube mod, and 2 new RDA’s!!!

 

The first new product we have in stock is the Helm wooden box mod!!! (DISCONTINUED)

Helm Wooden Box Mod

It’s Dual 18650 wired in parallel and it chucks like no other!!  Longer battery life and less voltage drop than traditional tubes and at an incredibly affordable price!!

Features:

  • Dual 18650 wired in parallel
  • IRLB3034PBF N-Channel Mosfet
  • Light up LED switch
  • Wooden construction

Another new product  we have in stock is the Vertex V2 RDA in black and copper versions!!! (Discontinued)

Vertex V2 RDA's Blk, CopperVertex V2 RDA's Blk, Copper Angle 2

Features:

  • Adjustable center pin
  • Dual Coil Builds and AFC
  • Center pin is sold copper with silver plating
  • AFC with dual or single airhole options
  • Reduced chamber with domed top cap for maximum flavor
  • Large post holes to accomodate lower gauge wire
  • Deck and negative posts machined from a solid block
  • Peek insulators
  • 22mm design
  • 2mm negative post holes & 2.5mm positive post holes

We also got in replacement glass for KangerTech Aero Tank Mega’s.  So if you’ve had an accident with your Mega you can now get replacment glass for it. (Discontinued)

AeroTank Mega

 

And last but most definitely not least!!! We have the complete Dark Horse RDA pack, with all of the accent rings, a black and a white chuff tip and a black and a white 510 adapter!!! (Discontinued)

Dark horse RDA Kit

The Dark Horse RDA Clone is now in stock! It features three huge square posts with massive terminals large enough to fit whatever crazy builds you mad builders can come up with! The center post is gold plated and the 510 contact pin is made of copper for minimal voltage loss.  With 16 different airflow options, the Dark Horse RDA chucks massive plumes of delicious vapor in whatever configuration you can devise! Includes custom wide bore drip caps almost as wide as the device itself as well as adapters so you can use standard 510 drip tips!

We also have a tube mod that is being kept as a closely guarded secret!  Come by the shop to find out what it is!!! Hope to see you in the shop soon!!!

 

 



File Under:

New Products