The rebuild class will be from 2 to 4 PM, Saturday, March 25th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.
Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!
NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.
Learn to build on the Ohmega Calypso!
The Ohmega Calypso is a 30mm tank that uses the old geni-tank style where the wick is dropped into the liquid and draws up to the coils. You can also set up the Calypso for use with single or dual coils. Three 7mm slits are found on both sides of the barrel, for a total of 42mm of airflow. The Calypso includes many accessories to really get the most out of your new RTA and to personalize it as much as possible.
- 30mm RTA
- Built by Ohmega
- Solid SS construction
- Genesis-style atomizer
- Single or dual coil setup available
- Four-post deck with PEEK insulator
- Copper 510 adjustable positive pin
- Glass or SS tank section
- Wide bore Chuff top or add your own drip tip with SS top cap
- 2.8mm lead holes
- Beefy Philips head post screws
The Ohmega Calypso, get it, build it, wick it, fill it, vape it! Available at Voltage Vapin’!
Build like a pro with the Coil Master Kit!
The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries!
Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!
Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.
We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises. Please have your valid ID ready and understand we are following the law. Thank you in advance for your understanding.
We still allow customers to bring their children in, as long as they are supervised by their parents. No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors. This Policy has now become a federal law. It is imperative that we comply.
We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.
We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.
file under: rebuild class
Thanks to Marty for doing this past Saturday’s free rebuild class. He did an awesome job & rebuilt lots of coils! This week Marty worked on a Authentic Aris RDA, that we sell, to show people just how easy it is to build coils. So come out and join us next Saturday April 18th, for our next rebuild class!!!
Come hang out any Saturday for our FREE rebuild class to learn from some of the best on how to build coils, battery safety and anything you would like to know about vaping!
Come by and check out our new RDA’s we have in stock!!
The Turbo RDA is manufactured by Tobeco, and designed by their USA Team “Ohm Nation”. This RDA has a PC grade plastic turbine wheel never seen in the market. This fan is designed to help draw in more air with ease, creating thicker and denser clouds. The Turbo RDA has a 304 stainless steel body with heat sinks at the bottom base, and at the top cap, adjustable airflow in the shape of the “Om” symbol. It has a 3 post design, with a square center post, and negative post machined to the deck that prevents spinning posts, high heat resistant PEEK insulator. To top it all off it includes a 22mm pyrex glass tip, as well as a 510 adapter to use any drip tip.
TURBO RDA Features:
- PC grade plastic turbine wheel
- 304 stainless steel construction
- Heat sinks to dissipate heat
- Square posts to prevent “Spinning post”
- PEEK insulator
- Negative posts machined to base
- Adjustable airflow
- Deep juice well
Airex Competition Clone
The Airex Competition Clone is unlike anything you’ve tried before!
Airex Competition Clone Features:
- 22mm Rebuilding Dripping Atomizer
- Removable AFC Ring for Full Competition Mode
- 2.5mm Stainless Steel Phillips Contact Screws
- Copper-SS Positive Post Design for Maximum Conductivity
- Large 4mm Juice Wells
- Six 4mm Air Holes
- Six 2mm Air Holes
So for cloud chasing fanatics or just people looking to get into dripping, the Airex Competition Clone is a great place to look for a great price!!!
Take advantage of the free rebuild class every Saturday from 2 -6PM.
New Mod in stock at Voltage Vapin’!!! – Clear Unregulated Box Mod!!! YOU ARE LOOKING AT A BRAND NEW ABS BEAST MECHANICAL BOX MOD
We have a new mod in stock! An awesome looking Clear Unregulated Box Mod!!! This new box mod is with a special design, totally different from other normal mods, the internal structure is visible and made of acrylic. So come by Voltage Vapin’ today and check this amazing Clear Unregulated Box Mod out while they are in stock!
Features for the Clear Unregulated Box Mod:
- Dual 18650 Parallel
- Sliding Back Door
- 510 Connector with a 23mm diameter
- Mechanical Connection between Button and Connector
We also have the Vicious Ant Phenom Clone back in stock at Voltage Vapin’!!
- Stainless steel construction
- Phenom engraving
- “Hybrid look” top cap
- Smooth locking mechanism
- Brass contact pins
- Bottom firing button
This thing is SMOOTH, super buttery threads, and that lock mechanism is revolutionary! The Phenom is the perfect mod if you’re trying to get into rebuilding or even looking to add to your collection. It is a must have and is coveted by all of our employees already! Come by and pick one up while supplies last!