Tag: coilmaster build kit

Thanks to our very own Matt for teaching the Rebuild Class here at Voltage Vapin’!

A big thanks goes to our very own Matt for teaching everyone to rebuild their coils at the Rebuild Class this Saturday!

class class class

.

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Matt taught a lot of people how to build their attys. The next rebuild class will be from 2pm-4pm, on August 5th

Come hang out any Saturday for our free rebuild class to learn from some of the best. We cover how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you. However, we can teach you with step by step instructions during the Rebuild class.



Master rebuilding with the Coil Master Build Kit!

in stock

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries! This kit goes above and beyond, so far that you’ll miss it if you don’t check it out soon! Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



Put that build kit to good use on Vapergate’s Mason Gemini 30mm RDA!

mason gemini

The Mason Gemini is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  It is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow has a dual air slot configuration along with the top cap option that allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Top Slot
      • 8mm by 2mm
    • Bottom Slot
      • 8mm by 3mm
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction
  • Threaded Delrin 510 Heat Sink
    • 10mm Stainless Steel Widebore Drip Tip
    • 10mm Delrin Widebore Drip Tip
  • Copper 510 Connection

The Mason Gemini is the next level of RDA awesomeness so make it yours at Voltage Vapin’!



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

class

 

Thanks to our very own Skyler for teaching the Rebuild Class here at Voltage Vapin’!

A big thanks goes to our very own Skyler for teaching everyone to rebuild their coils at the Rebuild Class this Saturday!
ClassClassClassclass

 

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Skyler taught a lot of people how to build their attys. The next rebuild class will be from 2pm-4pm, on April 22nd.

Come hang out any Saturday for our free rebuild class to learn from some of the best. We cover how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you. However, we can teach you with step by step instructions during the Rebuild class.



Need a new RDA to use after learning how to build at the build class?

Peerless RDA by Geekvape

peerless colors

The Peerless is another great RDA produced by none other than Geekvape. With this RDA’s completely different style build deck, it is made for both complex builds or simple builds in either a single coil or dual coil configuration. They put a unique twist on the 2 post style with having 2 options on how you build it. There is the regular style post for dual coils but if you have an absolutely crazy build that you want to run in single coil mode, it has 2 wider post holes above it! With a nice build in this RDA, it competes with the best on its flavor game.

  • 24mm
  • unique 2 post style
  • multiple post holes for different style builds
  • wide bore chuff cap
  • Big adjustable air flow

Stop by Voltage Vapin’ and check out the Peerless RDA by Geekvape!



Need the tools to make building a breeze?

Coil Master Kit

in stock

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries! This kit goes above and beyond, so far that you’ll miss it if you don’t check it out soon! Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!

Step up your building game with the coil master build kit at Voltage Vapin’!



naked

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

class

The Host of this Saturday’s Rebuild Class April 15th will be our very own Skyler at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, April 15th, and hosted by Skyler. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

build class

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Pharaoh RTA!

pharaoh rta

The Pharaoh RTA is the latest atomizer designed by the world famous RiP Trippers in conjunction with Digiflavor. Measuring 25mm at it’s base and expanding to 27mm at the widest point, the Pharaoh RTA’s body features a streamlined design. In addition, the Pharaoh features a tank capacity of 4.6ml and when installed with the included expansion tube, can be expanded an additional 3ml in capacity. The Pharaoh RTA’s build deck features a two post spring loaded clamp style configuration primarily intended for single coil builds. The Pharaoh RTA features one of the most dynamic airflow systems available today, with two independently adjustable airflow systems located at the top and at the bottom of the chassis. The top airflow system features dual 2mm diameter airholes that lead directly down into the build chamber, providing smooth and direct airflow. The bottom airflow system features large dual airslots that utilizes a click-to-set system with five different airflow settings ranging from fully open to fully closed. Offering one of the best and most complete systems presented, the RiP Trippers Pharaoh RTA enters the market as the most feature packed RTA available today.

Product Features:

  • 27mm Diameter at Widest Point
    • 25mm at Base
  • Expandable Juice Reservoir
  • Full Shelf Styled Two Post Build Deck
  • Top and Bottom Dual Adjustable Airflow
    • 15mm by 2mm Each Bottom Airslot
    • 2mm Diameter Each Top Airhole
  • 10mm Bore Delrin Drip Cap
    • Delrin Insert
  • Delrin 510 Drip Tip Adapter
  • PEEK Insulators
  • Gold Plated 510 Contact

Get your Rip Trippers Signature RTA today! Now in stock at Voltage Vapin’!

 



Build like a pro with the Coil Master Build Kit!

coil master build kit

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries! This kit goes above and beyond, so far that you’ll miss it if you don’t check it out soon!

Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



build class

 Please make sure you have your I.D. present when entering the store. The law now requires us to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The Host of this Saturday’s Rebuild Class March 25th will be Johnnie Owens at Voltage Vapin’! (UPDATED)

The rebuild class will be from 2 to 4 PM, Saturday, March 25th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

class johnnie

class johnnieclass johnnieclass johnnieclass johnnie

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Ohmega Calypso!

(Discontinued)

calypso

The Ohmega Calypso is a 30mm tank that uses the old geni-tank style where the wick is dropped into the liquid and draws up to the coils.  You can also set up the Calypso for use with single or dual coils. Three 7mm slits are found on both sides of the barrel, for a total of 42mm of airflow. The Calypso includes many accessories to really get the most out of your new RTA and to personalize it as much as possible.

Features:

  • 30mm RTA
  • Built by Ohmega
  • Solid SS construction
  • Genesis-style atomizer
  • Single or dual coil setup available
  • Four-post deck with PEEK insulator
  • Copper 510 adjustable positive pin
  • Glass or SS tank section
  • Wide bore Chuff top or add your own drip tip with SS top cap
  • 2.8mm lead holes
  • Beefy Philips head post screws

The Ohmega Calypso, get it, build it, wick it, fill it, vape it! Available at Voltage Vapin’!



Build like a pro with the Coil Master Kit!

rebuild kit

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries!

Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



voltage

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: rebuild class

Thanks to our very own Skyler for teaching the Rebuild Class here at Voltage Vapin’!

A big thanks goes to our very own Skyler for teaching everyone to rebuild their coils at the Rebuild Class this Saturday!

classclassclassclass

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Skyler taught a lot of people how to build their attys. The next rebuild class will be from 2pm-4pm, on March 25th.

Come hang out any Saturday for our free rebuild class to learn from some of the best. We cover how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you. However, we can teach you with step by step instructions during the Rebuild class.



Build like a pro with the Coil Master Kit!

build kit

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries! This kit goes above and beyond, so far that you’ll miss it if you don’t check it out soon!

Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



Build in style with one of our Coil Master Mats!

build mat

The Coilmaster build mat is a great new addition to any builders arsenal and it’s made with great quality! This Mat is great to protect you desk or table when you do your builds.It measures 33×15 Plenty of room for the beginner or advanced builder. When you are clipping those pesky leads, they actually stick to the mat instead of bouncing and flying everywhere!

With Coil Master’s Build Kit and Build Mat from Voltage Vapin’, you’ll be a professional builder in no time!



voltage

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

build class

 

The Host of this Saturday’s Rebuild Class January 14th will be our very own Kevin! (UPDATED)

The rebuild class will be from 2 to 5 PM, on Saturday, January 14th, hosted by Kevin. If you are new to coil building or if you’re a pro you will have a good time and possibly learn something new. The rebuild class will be held at the high top table in the main lobby.

rewbuild class

rebuild classrebuild classrebuild classrebuild classrebuild classrebuild class

 

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Gear up for the class with the Coilmaster Coil Building Kit!

class

 

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries! This kit goes above and beyond, so far that you’ll miss it if you don’t check it out soon! Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



Limitless XL

(DISCONTINUED)

xl

Limitless does it again folks with the new Limitless XL tank! This bad boy features a 0.15 Ohm Quad screw in coil (50-215W range) and 2 rebuildable decks, that’s right, 2 different rebuildable decks, one for single coils and one for dual coils, and check this, both of those decks already come pre built with some stellar coils like alien wire! Convenience without sacrificing quality is key with this new tank, if you are a pro and make some crazy builds or just looking into learning how to rebuild, this is the perfect tank for you because of the options for the quad coil or rebuildable!  The airflow on this one actually comes from the very bottom ensuring great flavor and dense clouds and with it’s 4ml liquid capacity there is no way you aren’t a winner with the Limitless XL tank!

  • 4ml liquid capacity
  • 0.15 screw in quad coil (50-215W)
  • single coil rebuildable deck
  • dual coil rebuildable deck
  • bottom adjustable airflow
  • 510 drip tip adaptor

The Replacement 0.15 ohm quad coils are also now in stock for the Limitless XL tank here at Voltage Vapin’! Get yours before they’re gone again!



rebuild class

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.  Please have your valid ID ready and understand we are just following the law.  Thank you in advance for your understanding.

Voltage Vapin’ still allows customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area.  Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.

We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.

Voltage Vapin’ values all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



File under:

voltage