Tag: coil building

The Host of this Saturday’s Rebuild Class June 17th will be our very own Thor at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, June 17th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

thor

build class build class build class build class

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on  the Ohmega BFT Plus RTA!

bft plus

If you thought Ohmega could not improve on the original BFT, think again!  The new Ohmega BFT Plus is a 30mm rebuildable tank.  Using one of two included PMMA tanks, The BFT Plus is capable of holding either 8mls or 12mls of your favorite liquid.  Dual airflow, top fill with a pressure cap instead of threaded.

Available in Black/Gunmental and Stainless Steel.

Stop in Voltage Vapin’ today and grab what is sure to the the hottest RTA on the scene, the Ohmega BFT Plus!



Prefer to drip?  Check out the Mason Gemini 30mm RDA!

mason gemini

The Mason Gemini is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  It is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow has a dual air slot configuration along with the top cap option that allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction

The Mason Gemini…make it yours at Voltage Vapin’!



no sale

Please make sure you have your I.D. present when entering the store. We are required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The Host of this Saturday’s Rebuild Class June 3rd will be our very own Payne at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, June 3rd, and hosted by Payne. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

payne build class

Please come on in and welcome Payne to his first build class at Voltage Vapin’!  He’s looking forward to teaching people how to build their attys and to do so safely.

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Geekvape Peerless RDA!

peerless

Geekvape continues to show us they know their stuff with the Peerless RDA. With this RDA’s completely different style build deck, it is made for both complex and simple builds. Single and dual coil configurations are possible with the Peerless. They put a unique twist on the 2 post style with having 2 options on how you build it. There is the regular style post for dual coils but if you have an absolutely crazy build that you want to run in single coil mode, it has 2 wider post holes above it! With a nice build in this RDA, it competes with the best on its flavor game.

  • 24mm
  • unique 2 post style
  • multiple post holes for different style builds
  • wide bore chuff cap
  • Big adjustable air flow

Stop by Voltage Vapin’ and check out the Peerless RDA by Geekvape!



Nilla Bunz is the perfect bakery flavor for dripping on your Peerless!

nilla bunz

Nilla Bunz is a mixture of golden goodness is a vanilla cinnamon honey bun which is delightfully sweet, but not overbearing. This golden goodness comes to us from Sinful Sweetz!

Stop in Voltage Vapin’ today to pick up one  of our best Max VG e-liquids today!



no sale

Please make sure you have your I.D. present when entering the store. We are required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The Host of this Saturday’s Rebuild Class May 27th will be our very own Skyler at Voltage Vapin’! (UPDATED)

The rebuild class will be from 2 to 4 PM, Saturday, May 27th, and hosted by Skyler. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

skyler

build classbuild classbuild classbuild class

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Smok Skyhook!

(DISCONTINUED)

skyhook

Smok made it’s way into the RDTA box market with a dramatic, yet familiar look!

A dual battery unit, the Skyhook is also a temp control mod, and a powerhouse to boot. The Smok Skyhook totes 220 watts, which makes it a rebuildable juggernaut with a built-in 9ml tank.  Reminiscent of the Alien Box mod, the screen is on the front of the mod, and the button is on the side.  This allows for easy access to the display, and for wattage adjustment.

Features:

  • 220w Max power
  • 9ml built in tank
  • Big side fire bar
  • 0.96inch Oled screen
  • Floating velocity posts
  • Support single coil buils

The Smok Skyhook… make it your next go-to mod here at Voltage Vapin’!



Fill up your Skyhook with an awesome liquid from Aisle 7!

Aisle 7 is a top-notch line of milky cereal flavors brought to you by the wonderful folks at Diamond Vapor.  If you haven’t tried any of these flavors before, you’re in for a real treat!

Irish Gold – The milk after a bowl of your favorite charms cereal

Square Crazy – The milk after your favorite cinnamon cereal.

Nora’s Dream – Back by popular demand! The milk after a bowl of your favorite fruity cereal.

Stop in today and find your new favorite cereal flavor from Aisle 7 at Voltage Vapin’!



no sale

Please make sure you have your I.D. present when entering the store. We are required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The Host of this Saturday’s Rebuild Class May 20th will be our very own Thor at Voltage Vapin’!

The rebuild class will be from 2 to 4 PM, Saturday, May 20th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

Thor

classclassclassclass

 

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Mason Gemini!

Vapergate Mason Gemini 30mm RDA

mason gemini

The Mason Gemini is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  It is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow has a dual air slot configuration along with the top cap option that allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Top Slot
      • 8mm by 2mm
    • Bottom Slot
      • 8mm by 3mm
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction
  • Threaded Delrin 510 Heat Sink
    • 10mm Stainless Steel Widebore Drip Tip
    • 10mm Delrin Widebore Drip Tip
  • Copper 510 Connection

The Mason Gemini is the next level of RDA awesomeness so make it yours at Voltage Vapin’!



Every builder needs a build kit!

Kaos V2 Build Kit

kaos build kit

Whether you’re an experienced builder or just starting out, the Kaos V2 Buld Kit is a must have!  Designed by builders for builders, it contains over 25 high quality tools to assist you in making anything from simple coils to the most extravagant of builds!  A durable, reinforced case, makes keeping all of your tools in one place a snap!

You Will Receive:

  • Needle nose pliers
  • Cutter pliers
  • Ceramic Tweezers
  • Pen Style Screwdriver kit
  •  Stainless Steel Tweezers
  • Hex key kit
  • Container for cotton squares
  • Container for prebuilt coils
  • Angled Wire cutter
  • Ohm Meter
  • Stainless steel scissors
  • Coiling Kit

A builders’ dream come true, stop in Voltage Vapin’ today to get your Kaos V2 Build Kit!



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The host of this Saturday’s Rebuild Class April 22nd will be Chris Moore at Voltage Vapin’! (UPDATED)

You may know Chris as Chris Mohm from many popular vape forums.  The rebuild class will be from 2 to 4 PM on Saturday, April 22nd. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

chris moore

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Calypso!

Alpha Ohmega Calypso RTA

(DISCONTINUED)

calypso

The Ohmega Calypso is an impressive new tank that yields the old genitank style. You can set up the Calypso for use with single or dual coils, with a PMMA plug that does not detract from the barrel airflow. The Calypso includes many accessories to really get the most out of your new RTA and to personalize it as much as possible.

Features:

  • 30mm RTA
  • Built by Ohmega
  • Solid SS construction
  • Genesis-style atomizer
  • Single or dual coil setup available
  • Four-post deck with PEEK insulator
  • Copper 510 adjustable positive pin
  • Glass or SS tank section
  • Wide bore Chuff top or add your own drip tip with SS top cap
  • 2.8mm lead holes
  • Beefy Philips head post screws

The Ohmega Calypso, get it, wick it, fill it, vape it! Available now at Voltage Vapin’!



Do you want to start building but you’re on a budget?

wirebacon

You don’t need to spend a fortune on expensive gear to start building. Come see us for all your coil building needs.



no sale

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class

The Host of this Saturday’s Rebuild Class April 8th will be our very own Chris at Voltage Vapin’! (UPDATED)

The rebuild class will be from 2 to 4 PM, Saturday, April 8th, and hosted by Chris. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

class

classclassclassclass

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Alliance V2+!

(DISCONTINUED)

alliance

Remember the Mutation X234? Take that and mix it with the Mason RDA and what pops out? The Alliance V2+! This guy is a 22mm dripper with so many options for how you want to vape that your mind will flip! It is a 4 post style build deck but what’s really unique is the different kinds of caps and accessories it comes with like different slam caps and even a condenser, or how about  a removable 510 heatsink. With all of the heatsinks in this one you won’t ever have to worry your RDA or mod getting even with some of the most extreme builds!

  • 22mm design
  • square 4 post
  • removable 510 heatsink
  • mutation style slam cap
  • flavor slam cap
  • condenser
  • removable air flow control
  • comes with 24g nichrome and cotton bacon

Make your dripping experience a great one with Alliance V2+ by Vapergate from Voltage Vapin’!



Build in style with one of our Coil Master Mats!

class

The Coil Master build mat is a great new addition to any builders arsenal and its made with great quality! This mat is great to protect you desk or table when you do your builds. It measures 33×15, plenty of room for the beginner or advanced builder. When you are clipping those pesky leads they actually stick to the mat instead of bouncing and flying everywhere!

Build like a pro on the Coil Master Build Mat from Voltage Vapin’!



voltage

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: build class