Category: Parts and Accessories

Thanks to our very own Thor for teaching the Rebuild Class here at Voltage Vapin’!

A big thanks goes to our very own Thor for teaching everyone to rebuild their coils at the Rebuild Class this Saturday!

thorclass1 Thor Class 2 thor Class3

 

 


thorclass 4.

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Thor taught a lot of people how to build their attys. The next rebuild class will be from 2pm-4pm, on July 15th.

Come hang out any Saturday at Voltage Vapin’ for our free rebuild class to learn from some of the best. We cover how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, 2016, we will no longer be able to build your coils or set up your atomizer for you. However, we can teach you with step by step instructions during the Rebuild class.



For easy building and plenty of room for Coils, don’t forget to check out

Vapergate’s Mason Gemini 30mm RDA

mason gemini

The Mason Gemini is a rehash of the original Mason and this time it features a 2 post build deck making it incredibly easy to clip those pesky leads and gives you more room for cotton and even bigger coils!  It is also 6mm deep which leaves room for a lot of cotton for intricate builds!  The airflow has a dual air slot configuration along with the top cap option that allows for a ridiculous amount of air to pass over your coils!

Features:

  • 2 Post build deck
  • Dual Adjustable Stacked Slotted Airflow
    • Top Slot
      • 8mm by 2mm
    • Bottom Slot
      • 8mm by 3mm
    • Specially Designed Top Cap Cutout
      • Can Throttle Top Slot Closed
  • Pewter Black Finish
    • Stainless Steel Construction
  • Threaded Delrin 510 Heat Sink
    • 10mm Stainless Steel Widebore Drip Tip
    • 10mm Delrin Widebore Drip Tip
  • Copper 510 Connection

The Mason Gemini is the next level of RDA awesomeness so make it yours at Voltage Vapin’!



The ultimate kit for builders designed by builders!

Kaos V2 Build Kit

kaos build kit

Whether you’re an experienced builder or just starting out, the Kaos V2 Buld Kit is a must have!  Designed by builders for builders, it contains over 25 high quality tools to assist you in making anything from simple coils to the most extravagant of builds!  A durable, reinforced case, makes keeping all of your tools in one place a snap!

You Will Receive:

  • Needle nose pliers
  • Cutter pliers
  • Ceramic Tweezers
  • Pen Style Screwdriver kit
  •  Stainless Steel Tweezers
  • Hex key kit
  • Container for cotton squares
  • Container for prebuilt coils
  • Angled Wire cutter
  • Ohm Meter
  • Stainless steel scissors
  • Spool of Kanthal Wire
  • Coiling Kit

A builders’ dream come true, stop in Voltage Vapin’ today to get your Kaos V2 Build Kit!



no sale

Please make sure you have your I.D. present when entering the store. We are required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer



file Under:
Class 7/8/17

New Products Galore at Voltage Vapin’!

First up for the new items we have a brand new RDA…

The Goon V1.5

goon v1.5

The Goon V1.5 is brought to you by a company called 528 Customs and if you are into the rebuild game you know of the Goon. It pioneered the clamp post style deck and now they have improved upon the original! Now on the V1.5 they made it a bridge clamp post style deck with way more airflow now making this one of the best competition RDA’s out there!  The Goon V1.5 also has an adaptor for squonking!

  • Bridge clamp post style build deck
  • Stainless steel post construction
  • 24mm diameter
  • Squonk capable
  • Huge cyclops style airflow

Check out the Goon V1.5 now at Voltage Vapin’!



Next up is the iJoy Captain PD270 now in Rainbow!

captain black and rainbow

The iJoy captain uses a brand new type of battery called a 20700 which is a good medium between a 26650 and an 18650! What’s great about these batteries is that  they are a 3000 mah, 40 amp battery making it perfect for high wattage coils! That’s not all though, the device actually comes with the 20700’s as well as adapters so you can use regular 18650’s! With a minimum atomizer resistance of 0.05 and a maximum of 234 watts this device is going to be the next go to mod for high power junkies!

  • Maximum of 234 watts
  • Upgradeable firmware
  • Minimum resistance of 0.05
  • Includes new 20700 battery
  • Includes 18650 adapter

Check out the new iJoy Captain PD270, now at Voltage Vapin’!



Brand new Vape Spinners are now in Stock!

vape spinner

Have you ever wanted your device to double as a spinner as well? Now you can because this little vape spinner has a male 510 to female 510 adaptor on it so any of your tank will screw right in. That screws right into your standard 510 mod and boom, you now have a spinner on your vape! It’s the perfect way to keep your spinner around without carrying a full size one.



no sale

Please make sure you have your I.D. present when entering the store. We are required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under:

new

Another Successful Build Class Today At Voltage Vapin’! (UPDATED)

A big thanks goes to our very own Skyler for teaching everyone to rebuild their coils at the Rebuild Class this Saturday!

 

 

Skyclass1

skyclass2Skyclass3Skyclass4

We had a great turnout again for the rebuild class this Saturday. Everyone had a great time and Skyler taught a lot of people how to build their attys. The next rebuild class will be from 2pm-4pm, on July 1st.

Come hang out any Saturday for our free rebuild class to learn from some of the best. We cover how to build coils, battery safety and anything you would like to know about vaping!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you. However, we can teach you with step by step instructions during the Rebuild class.



Be Ready for the Next Class with the Coil Master Rebuild Kit!

Coil Master Kit

in stock

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries! This kit goes above and beyond, so far that you’ll miss it if you don’t check it out soon! Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!

Get everything you need for anything you want to rebuild, Here at Voltage Vapin’!



Need some wire to build with? Check out the Kidney puncher wire we have!

kidney puncher

Kidney Puncher is the new standard for wire these days and we are proud to have them in stock! We brought in a couple different sizes including 21 gauge, 32 gauge, and 0.8 ribbon! The 21 gauge is the perfect wire for all simple builds with the perfect mix of flavor and clouds for an enjoyable all day vape! If you’re looking to do some super-complicated builds, like fused claptons, 32 gauge will be perfect for this. Lastly, we now carry the 0.8 ribbon wire, a necessity for some of the new clapton builds people are doing.

Voltage Vapin’ is the one stop shop for all your vaping needs so come on by and find that item you have been searching for!



no sale

Please make sure you have your I.D. present when entering the store. We are required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



File Under:
class

Lost Vape’s Triade DNA250 Has Made Another Return to Voltage Vapin’!

Proudly Returning to our Display Case…

The Lost Vape Triade DNA250 250W TC Box Mod

,

The Lost Vape Triade DNA250 TC Box Mod is the ultimate representation of Evolv’s latest DNA250 chipset. The chassis of the Triade DNA250 implements similar aesthetics from its predecessor, featuring a genuine leather battery cover on a slim poly-angular body that rests comfortably in the palm of the user. The Triade DNA250 integrates Evolv’s most powerful chipset, featuring incredible 97% output efficiency rating, tremendous range from 1 to 250 watts, full temperature control with wide range of heating elements, and coupled with Escribe software for the most customizable and upgradeable output capability.

Features:

  • Triple 18650 Battery Platform – Batteries Not Included
  • Wattage Output Range: 1-250 Watts
  • Voltage Output Range: 0.5-9.3 Volts
  • Temperature Range: 200-600F
  • Min Kanthal Resistance: 0.2ohm
  • Min Temperature Resistance: 0.1ohm
  • Patented Evolv DNA250 Chip
  • Intuitive 0.91 Inch OLED Display
  • Sleek Poly-Angular Frame
  • Premium Genuine Leather
  • Magnetized Battery Cover
  • Multiple Ventilation Stripes
  • Revolutionary Triple 18650 Platform
  • Reverse Protection System
  • Upgradeable Escribe Software
  • 97% Output Efficiency
  • Cell-by-Cell Monitoring
  • Cell Balancer
  • Atomizer Protection
  • Low Resistance Protection
  • Short Circuit Protection
  • Overheat Protection
  • Low Voltage Step Down Protection
  • 510 Connection

Currently available with a black frame with purple ostrich plates, or a black frame with a pearl coffee color plate.

We recommend that you hurry in today…these mods are so hot they’re sure to go fast…AGAIN!!!

Make all your friends jealous by rocking the very best of the best, the Triade DNA250, from Voltage Vapin’!



Restocked Alongside the Triade

The SMOK AL85 Alien Baby 85W TC Starter Kit in RAINBOW!

RainbowAl85

The SMOK AL85 Alien Baby 85W Temp Control Starter Kit is the compact revolutionary system inspired by the widely acclaimed Alien 220W, and includes the TFV8 Baby Beast. The AL85 is a single 18650 battery device with its signature side bar fire mechanism.

Available in Black/Gold, Black/Gunmetal, Black/Red, Purple/Black and now Full Rainbow!

The perfect combination of a compact device and a powerful hit; stop in today and pick up you AL85 from Voltage Vapin’!



Smok Baby Beast Replacement Glass

replacement glass

Replacement Glass is perfect for anyone who has already broken their glass, or likes to keep a spare on hand. It’s definitely a good idea to pick this up while we have it in stock!



no sale

Please make sure you have your I.D. present when entering the store. We are required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



File Under:
BlackTriade Returned

The Cupti has returned to Voltage Vapin!

New vapers looking to upgrade, or experienced looking for a spare?
The Kanger Cupti is back in stock in Black!!!

cupti

The Kanger CUPTI is a compact, all in one system that features a side by side design which creates a compact overall profile and form factor, packing in a 5 milliliter top filled CLOCC Sub-Ohm Tank alongside a dual mode output powered by a single high amperage 18650 battery (sold separately).  The output features a power range of 7 to 75W alongside temperature controlled output with Ni200 Nickel, Titanium, and NiChrome heating elements, allowing it easily power the CLOCC coil family. In order to save space as efficiently and effectively as possible, Kanger has positioned the OLED display along with the two adjustment buttons on the top of the chassis, making visibility and adjustments during use a priority.

The tank portion features a top filled capacity of 5 milliliters, and due to the design of the airflow and method of coil attachment, is practically leak proof. Airflow is fed from dual 10mm by 2mm airslots located at the removable top section of the tank assembly, and feeds down directly into the coil. Included with each set is a 0.5 ohm CLOCC SS316L Coil rated for 16 to 60W and a mouth to lung designed 1.5 ohm CLOCC NiCR Coil rated for 10 to 26W. Compact, affordable and highly functiona tool, the Kanger CUPTI 75W TC System is perfect for beginners as well as users looking for a convenient, all in one platform.

Product Features:

  • All In One System
    • Compact Form Factor
    • Portable and Capable
  • Dual Mode Output
    • 7 to 75W Power Output
    • 200 to 600 Degree Fahrenheit Temperature Controlled Output
      • Ni200 Nickel Support
      • Titanium Support
      • NiChrome Support
      • 0.15 to 1.3 ohm Atomizer Resistance Range
  • Top Filled Built In CUPTI Sub-Ohm Tank
    • Threaded Top Fill
      • 5ml Tank Capacity
    • Adjustable Top Airflow
      • Dual 10mm by 2mm Airslots
      • Highly Leak Resistant Design
    • Top Section Attached Coil System
    • Slim and Wide POM 510 Drip Tip Included
  • Top Positioned OLED Display
    • Three Line Display
    • Output Wattage/Temperature
    • Atomizer Resistance
    • Output Voltage
    • Battery Life Indicator
    • 180 Degree Rotation

The Cupti is one HOT little mod, so come get yours today before they’re gone!



mother's day

Not sure what to get your favorite vaper for Mother’s Day? Voltage Vapin’ is here to help!

gift card

With a Voltage Vapin’ gift card, Mom is sure to find something she will love from our large assortment of liquids, devices, and accessories. Better yet, our gift cards can be purchased in any amount, no fees, and never expire!

Stop in and grab Mom a Voltage Vapin’ gift card today!



Top Tank Mini Replacement Glass

tfv4 replacement glass

You asked; we answered! The Top Tank Mini Replacement Glass is perfect for anyone who has already broken their glass, or likes to keep a spare on hand. It is definitely a good idea to pick this up while we have it in stock!



no sale

Please make sure you have your I.D. present when entering the store. We are required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file Under:
Cuptireturns

Back in stock now at Voltage Vapin’!

Sleek Nautilus 2 black back in stock!

Aspire Nautilus 2

nautilus 2

Voltage Vapin’ welcomes back the Nautilus 2 in black to serve your vaping needs. The tank design has a metal sleeve around the glass making this one light years more durable than the previous version. Even with the metal sleeve, the tank still has replaceable glass, so if you somehow manage to break that you won’t have to worry because it can still be fixed! The Nautilus 2 also features a top fill design making it much easier to fill the 2ml tank. Still have old a stack of coils for the original Nautilus tank? That’s great news because the Nautilus 2 uses the same great coils as the original!

  • Top fill
  • Metal sleeve covers pyrex glass for durability
  • 2ml tank
  • 1.8 ohm BVC coil are compatible

Come on in and pick yours up today at Voltage Vapin’!



Smok’s AL85 is back in stock in Black and Red!

SMOK AL85 Alien Baby 85W TC Starter Kit

al85 all colors

The SMOK AL85 Alien Baby 85W TC Starter Kit is the compact revolutionary system inspired from the widely acclaimed Alien 220W, and includes the TFV8 Baby Beast. Intuitively crafted from SMOKTech, the SMOK Alien Baby measures a compact 71mm by 48mm by 27mm for portability form factor while maintaining the same design language as the most popular featured set of 2016, the SMOK Alien 220W. The chassis design implements a great balance of ergonomics and incredible range for its size, featuring a top-loaded battery cap that allows the fitment of a single 18650 battery. The AL85 integrates a squeeze to fire mechanism while showcasing the epicenter of functionality within the OLED display, providing extensive information within an easy-to-read operational interface. The Alien Baby Mod has a power output range of 1 to 85W alongside a sophisticated temperature control that has onboard support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. In addition, the Alien Baby provides various Memory Modes and drawing effects. Included in each set is the TFV8 Baby Beast Tank, featuring a well-balanced dynamic range with 3mL juice reservoir, precision airflow control, signature hinged top-fill system, and introducing the new Baby Turbo Engines coil structure. A pinnacle in designs that exhibits the combination of user-friendly ergonomics, compact form factor, and incredible performance, the SMOK AL85 Alien Baby 85W TC Kit establishes itself as the premiere system in the industry.

Available in Black/Gold, Black/Gunmetal, and Black/Red.

The perfect combination of a compact device and a powerful hit; stop in today and pick up you AL85 from Voltage Vapin’!



Having trouble keeping your hands busy?

New Spinners now in stock!

We now have Camo tri spinners as well as a rainbow spinner and a stainless steel spinner. Keep your hands occupied for hours with these great new fidget spinners!

Come into Voltage Vapin’ and check out our new stock!



no sale

Please make sure you have your I.D. present when entering the store. We are required by law to I.D. anyone who appears to be 27 years of age or younger.

If you do not have a valid ID stating that you are 18 or over, you cannot test any products, make any purchases, or vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law.

We value our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: back in stock