Category: MODS

Just in at Voltage Vapin’, we just received our initial order of the iTaste V3.0’s!

Just in at Voltage Vapin’, we just received our initial order of the iTaste V3.0’s!

 

iTaste V3.0

The iTaste VV/VW V3.0 is a microprocessor controlled variable-voltage/variable-wattage (VV/VW) personal vaporizer that lets you adjust the voltage or wattage in seconds with just a few button presses. It’s quick and easy!
Main Features:

Variable Voltage:
voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments.

Variable Wattage:
Wattage can be adjusted from 6.0 – 11.0 W in .5 watts increments.

Ohms meter:
Resistive Load Detection.

Puff Counter:
The puff counter will record how many puffs you have taken. The records will be cleared when the device is turned off.

Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection helps protect the iTaste VV against faulty atomizers.

Over-Discharge Protection:
The iTaste VV monitors the battery voltage and will automatically turn off when the battery is discharged.

LED Battery Indicator:
The iTaste VV battery utilizes an advanced capacity display via green, yellow and red LED lights. Users will know the battery’s capacity via the color of the LED Button. The LED lights will show green, yellow or red to indicate full battery life, half capacity or charging needed.

Superior Battery Life:
The iTaste VV e-cigarette features a built-in 800 mAh polymer Li-Ion rechargeable battery.

510 Threaded:
The iTaste VV is threaded to accept 510 accessories, including the iClear10,iClear16 and iClear30 clearomizers.

ON/OFF Battery Switch:
Quickly clicking three times will power the device on or off. Once the device is on, holding down the button will activate the battery. This safety feature prevents the atomizer from turning on while it’s in your pocket or bag, as well as inadvertent settings changes.

10-Second Cutoff:
If the button is held down for 10 seconds or longer, the iTaste VV will shut itself off until the button is released.

Passthrough:
The iTaste VV is charged through a Micro USB Port. You can recharge it with any standard MicroUSB cable. It can also work as a pass-through device for simultaneous vaping and charging.

Settings Retention:
The device remembers the last voltage or wattage used when switching batteries.

Display Information:
The bright display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.

DETAILS:

  • Size:15*15*108.5mm Battery Capacity:800mAh
  • Operating Voltage:3.3V-5.0V in .1 increments; Wattage 6w-11.0w in .5 increments
  • Charging Time:1.5 Hours
  • Release Date:2013.05.25

We also got in a restock of iTaste MVP kits, the Joyetech EVIC kits, juices from iVape to include Carolina Crush, Pomegranate, Blackberry Lemonade and two new flavors Menthol and Vanilla.

Come on by and rub Vapin Buddha’s belly while you’re here for good luck.

IMG_8698

Silver Bullet Mod (DISCONTINUED)

SBThis mod is designed to accept an 18650 battery (Voltage Vapin’ always recommends IMR batteries for use in their mods and does recommend stacking batteries).  It is a high quality well respected mod threaded for a 510 connection so you can mount your choice of atomizer or cartomizer.

Smoketech Bolt Discontinued

Smok_Bolt__with__gunmtlEntry level set voltage device. A favorite for an inexpensive back up mod.

Features: 510 connection, battery vent, upper body button.

Includes extender so you can use 18650 batteries (or 18500 without extender),  Unit only.

Available in Gunmetal or Chrome finishes

Variscope (Transformer) VV Discontinued

NEW_Variscope____50bd63560572cIntroducing: The Variscope.

Adjustable Voltage e-cigarette mod.  You can adjust the voltage from 3V – 6V with the push of a button.   The Variscope is a telescopic VV mod, meaning you can use an 18650, and 18350 or in between, and simply screw the bottom tube to adjust size. IMR High Drain replaceable/rechargable batteries for a lasting performance, please use batteries rated no less than 4C.  Made of solid stainless steel colored chrome plated brass with an adjustable airflow ring on the top cap. ! Top cap has an adjustable pin positive, that helps correct atomizer connection issues that frequently plague e-cigarettes  – Clicking the fire button 5 times will display attached atomizer resistance.

Mod unit only.
2.5A limit

please ask any other questions before ordering.

This mod is intended for experienced vapers.

Do not tamper with batteries, IMR Lithium batteries can be very volitile.

Please be sure to look at proper instructions and handling for Li-ion batteries before handling.
This unit may allow you to discharge the battery below it’s cutoff rating.  Do not discharge the battery to less than 3.2V – please recharge before running the battery this low.  Discharging the battery below this rate can be dangerous.

Warranty: 14 days for manufacturer’s defect.  Does not cover physical damages.