Category: MODS

Just in at Voltage Vapin’, The iTaste CLK 1280 Express Kit

The iTaste CLK 1280 Express Kit

 

IMG_9575

 

iTasteCLK1280

Welcome to the iTaste CLK1280. An Advanced Personal Vaporizer from Innokin with Variable Voltage & Vape While Charging Technology.

The Primary Features:

Battery Level Indicator: The iTaste CLK battery capacity is displayed via green, yellow and red LED lights. When the iTaste CLK! battery is fully charged the LED light on the firing button will turn green and power off.

Green = Fully Charged

Yellow = Half Power.

Red = Low Power. Please Charge.

Large battery capacity: The iTaste CLK1280 has a built-in 1280 mAh polymer Li-Ion rechargeable battery.

ON/OFF battery switch: Press the power button three times in rapid succession to turn on the iTaste CLK!. Once the iTaste CLK! is On hold down the power button to activate the atomizer and vape. When the iTaste CLK! is not in use press the power button  three times in succession to power off the iTaste CLK! Advanced Personal Vaporizer. Always power off the iTaste CLK! Advanced Personal Vaporizer when it is not being used, or when it is going to be stored in a pocket, bag or purse.

Short Circuit/Atomizer Protection: Short Circuit/Atomizer Protection protects the iTaste CLK! Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

Over-Discharge Protection: The iTaste CLK! Advanced Personal Vaporizer monitors the battery voltage and will automatically power off when the battery is discharged.

Technical Specifications: 

Variable Voltage: The rotational wheel adjusts voltage in the following increments: 3.5, 3.8, 4.0, 4.3, 4.5, 4.8, 5.0

The red LED will blink six times and turn off if the rotational wheel is not in place.

To set your desired voltage turn the rotational wheel to the left or right until you hear an audible click. When adjusting the voltage with the rotational wheel always check to ensure the wheel is set to your desired voltage.

Standby current: 50uA max

Maximum output current:3.5A

Maximum output wattage:15W

Clearomizer Resistance: 1.2 ohm (minimum), recommendation 2.5Ohm

Battery: Built-in 1280 mAh polymer Li-Ion rechargeable battery.

Charging: Micro USB DC5V/500mA

Short Circuit Protection: 0.6 +/-0.2 ohm



File Under:

iTaste CLK 1280 Express Kit

Coming soon to Voltage Vapin’ the iPV V2! (DISCONTINUED)

We are happy to announce that Voltage Vapin’ will be carrying the iPV V2 7W – 50W box mod.

iPV V2

 

These mods are awesome and we can’t wait to get them in stock!  Sorry no pre-sales.  We will keep you up-to-date on when they will be in.

IPV2 50w box mod Specs:

Output Power: 7-50W
Output Voltage: 3.6-8.5V
Input Current: 1.3-20A
Input Voltage: 3.2-4.5V Chip:
SX330
Efficiency: 93%
Loading resistance: 0.2ohm-3.0ohm
Screen Size: 0.96”OLED Touch Sensor

 

File Under:

iPV V2

Voltage Vapin’ Vapemail Has Arrived!

We just got our Vapemail in today! I know a lot of you have been waiting for this moment.

Voltage Vapin’ would like to welcome the Akuma Clone Mod and the Stingray X to our collection.

 

First on the list: Akuma Clone Mod (DISCONTINUED)

black brass_akuma

 

The Akuma is constructed of copper with copper contacts. The top cap is constructed of brass while the bottom cap is copper with brass locking ring. This mod comes with an 18350 tube, 18500 tube, and a 18650 extension. The firing switch is magnetic and comes with extra spring.

 

 

 

 

 

 

*while supplies last*


 

Stingray X Clone From Tobeco (DISCONTINUED) 

The Stingray X is the evolution of the Stingray mod from JD Tech.  The Stingray X is actually two tubes, one inside the other.  The inner copper tube handles all of the electrical stuff.  Conductivity is un-matched.  The outer stainless steel sleeve, with the decorative cutouts, provide the proper level of sophistication to really set this mod off.

When you add in the matching drip tip, the entire setup just screams class.

Taking it to the next level, however, Tobeco has included the hybrid adapter as well.  With this, you simply remove the top cap, screw this on your favorite atomizers and then screw it all onto the battery tube.

stingray x

 

 

 

 

 

 

 

 

Features:

Fully-Mechanical Operation

  • Constructed from Copper and 304 Grade Stainless Steel
  • Magnetic Bottom-Firing Switch with Adjustable Throw
  • Standard-Threaded Stainless Steel Locking Ring
  • Atomizer Airflow Vents in Top Cap
  • Top and Bottom Caps are Copper with a Stainless Steel Wrap
  • Silver-Plated Copper Positive and Negative Contacts
  • Floating Positive Contact
  • Milled Engravings: Stingray Logo and Serial Number on 18350 Tube, JD Tech Logo on Switch
  • Serialized
  • Diameter: 22mm
  • Finish: Brushed Stainless Steel overlaid onto Copper

 

 

*while supplies last*


 

File Under:

Vapemail