Category: Batteries and Chargers

Efest IMR 18650 Battery (2) (ENDED)

18650_IMR_2000mA_50efa3240833e18650 IMR 2000mAh 3.7V Li-ion are used for powering devices at 3.7Volts and can be used in various types of e-cigarettes, electronic cigarette MODS. These IMR 18650’s are 2000mAh strong, so that’s some serious all day 3.7V Vaping, and they are IMR batteries which perform better than standard with high-draw devices like mods, variable voltage mods, and low resistance devices.. They are rechargeable and have a safer chemistry than lithium ion batteries, to help in preventing the battery from being able to vent, over-discharge, or explode. Please never use stacked batteries for any iVape mod, or any other mod or e-cigarette, as lithium batteries can become quite volatile when used incorrectly.

 

 

What’s included:

Two (2) IMR Li-ion 18650 batteries

 

Technical Information:

Manufacturer: Efest

mAh: 2000

Battery Size: 18650

Voltage: 3.7

Protection: IMR chemistry

 

 

Warnings:

By Purchasing this product, you are accepting full responsibility for it’s use. You agree that in no way can iVape be held responsible for any misfortune caused by misuse of this item.  Do not expose to extreme heat or water, and be aware of the dangers of handling Li-ion batteries.   Do not use any iVape product or MOD with unprotected batteries of any sort.  Misuse of Lithium battery technology may result in fire or explosion.  Use at your own risk.  These battery have a wide-end positive, and are not suitable for mods which require nipple-tip positives due to cheap springs and poor measurement.

 

Warranty and Replacement info:

14 day replacement on defective parts or DOA. No Refunds. Physical damage is not covered by the return policy.


TrustFire TR-001 Multi-Charger

Trustfire_Tr_001_51488bf9e385cThe TrustFire Brand Tr-001 Multi-charger can charge 10440, 14500, 18650 and various other batteries at either 3.7V, a handy application charger for different kinds of batteries – possibly the greatest charger in the universe.  Can charge in dual channels and features smart-charge cut-off.

 

 

What’s included:

One (1) TrustFire Tr-001 Multi-charger

 

Technical Information:

Manufacturer: TrustFire

Battery Size: 10440 / 18650 / rcr123a (3.7V only) / 14500

Voltage: 3.7-4.2VV

Protection: Smart-Charge Cut-off

 

eGo Passthrough Battery

1000mAh_Joye_eGo_4e3a0f752c84b

The Joye eGo passthrough battery is amazing!  Usable as a normal passthrough, but it unplugs and becomes a fully usable eGo battery with 650mAh or 1000mAh of all day vape-on-the-go power!  Good quality, good battery life, and a Genuine Joye!  Get them while you can! Features the on/off 5 click protection.

Depending on stock you will receive either the eGo t-2 or ego C t2 version of this product.  Both function the same and are the same device, the only difference being the led color changes in the c version as the battery drains.

The biggest improvement of eGo-T 2 upgrade control unit: it has two modes to the switch. One is the constant voltage output mode which gives constant 3.3V(when it’s driving the atomizer (load added) and is the same as the normal eGo-T battery. The other is variable voltage output mode, in this mode, the voltage will change from 4.15V to 3.6V as the lithium battery power decrease. With higher voltage up to 4.15V, this give you a better vapor feeling.

Meanwhile, it is easier to switch, check below:
Switching operation and features:
1. From constant voltage output mode to new battery voltage voltage output:
1.1 When the mode is 3.3v constant output mode, lock the battery by 5 clicks first(white LED blinks 3 times).
1.2 By pressing button for 5 seconds(not 5 clicks), LED will change to orange with 3 blinks. The battery has switched to variable voltage output mode(battery voltage output mode).
1.3 Then click the button for 5 times, then you can smoke in battery voltage output.
1.4 In new battery voltage output mode, the LED is orange.
1.5 When charging, orange LED will blink 5 times in this new mode.

2. From new battery voltage output

to constant voltage output mode:

2.1 In new battery voltage output mode, lock the battery by 5 clicks first(orange LED blinks 3 times).
2.2 By pressing button for 5 seconds(not 5 clicks), LED will change to white with 3 blinks. And the mode has switched to 3.3V constant voltage output mode.
2.3 Then click the button for 5 times, then you can smoke in 3.3V constant voltage.
2.4 In 3.3V constant voltage, the battery features has no difference from present eGo-T battery.
2.5 When charging, white LED blinks 5 times in this new mode.

 

What’s included:

One (1) eGo Passthrough battery (Stainless Steel or Black color, 650 or 1000mAh capacity)

USB passthrough cable