The Host of this Saturday’s Rebuild Class March 25th will be Johnnie Owens at Voltage Vapin’! (UPDATED)

The rebuild class will be from 2 to 4 PM, Saturday, March 25th, and hosted by Thor. If you are new to rebuilding or if you’re a pro you will have a good time and learn something new. The rebuild class will be held at the high top table in the main lobby.

class johnnie

class johnnieclass johnnieclass johnnieclass johnnie

Come hang out any Saturday for our rebuild class to learn from some of the best on how to build coils, set up atomizers and teach you battery safety!

NOTE: Due to the new FDA regulations that took effect on August 8th, we will no longer be able to build your coils or set up your atomizer for you but we can teach you how with step by step instructions.



Learn to build on the Ohmega Calypso!

(Discontinued)

calypso

The Ohmega Calypso is a 30mm tank that uses the old geni-tank style where the wick is dropped into the liquid and draws up to the coils.  You can also set up the Calypso for use with single or dual coils. Three 7mm slits are found on both sides of the barrel, for a total of 42mm of airflow. The Calypso includes many accessories to really get the most out of your new RTA and to personalize it as much as possible.

Features:

  • 30mm RTA
  • Built by Ohmega
  • Solid SS construction
  • Genesis-style atomizer
  • Single or dual coil setup available
  • Four-post deck with PEEK insulator
  • Copper 510 adjustable positive pin
  • Glass or SS tank section
  • Wide bore Chuff top or add your own drip tip with SS top cap
  • 2.8mm lead holes
  • Beefy Philips head post screws

The Ohmega Calypso, get it, build it, wick it, fill it, vape it! Available at Voltage Vapin’!



Build like a pro with the Coil Master Kit!

rebuild kit

The Coil Master rebuild kit is an amazing DIY setup for beginners and experienced builders alike. Inside, you’ll find everything that you need to jump straight into rebuilding! This set comes with angled cutters and needle nose pliers for getting into those tight spaces while rebuilding your RDA, as well as ceramic AND angled tweezers, which makes pinching your coils and wicking your RDA a dream. You’ll also find a set of precision flat head and Phillips head screwdrivers with fully rotational palm grips in this kit. On the right half of the kit, you’ll find everything you need in order to prep your coils and cotton, which includes a pair of fold-out scissors, an ohm reader, an ergonomic coil jig, as well as the cotton and wire! The Coil Master kit even goes the extra mile by including a cut-out for an extra pair of 18650 batteries!

Come by Voltage Vapin’ and pick up one of these Coil Master rebuild kits– you won’t regret it!



voltage

Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.

We apologize for any inconvenience this may cause, but if you do not have a valid ID stating that you are 18 or over, we cannot let you test any products or make any purchases. You will not be allowed to vape on the premises.  Please have your valid ID ready and understand we are following the law.  Thank you in advance for your understanding.

We still allow customers to bring their children in, as long as they are supervised by their parents.  No one under 18 will be allowed in the sales counter area. We do not allow parents to purchase for minors.  This Policy has now become a federal law. It is imperative that we comply.

We check I.D.’s for everything we sell, not just liquids and devices. Chargers and all accessories are included in the law.

We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.



file under: rebuild class