The New squonk compatible Velocity V2 has just arrived at Voltage Vapin’!
The Velocity V2 RDA By Tobeco retains many of the same great features as the original Velocity RDA with some additional features and improvements. The Velocity V2 is 3mm shorter than the original Velocity with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 compatible with squonk mods INCLUDING the DripBox by Kangertech.
Features and Specifications:
- 22mm Diameter
- 304 Grade Stainless Steel
- 5.5mm Deep Juice Well
- 3mm Shorter Profile
- Reduced Chamber
- Thicker Top Cap
- Cap Alignment Registration Marks
- Top Cap Locking Tab
- Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
- Two Post Design
- Hex Screws
- PEEK Insulator
- Thicker Negative/Positive Posts
- Larger Post Holes
- More Efficient Indirect Airhole Placement
- Dual Adjustable 2mm by 8mm Horizontal Slots
- Six Adjustable 2mm Indirect Airholes
- Delrin 12mm Widebore Drip Tip
- Delrin 510 Drip Tip Adaptor
The Snow Wolf 200W is the Perfect fit for the Velocity V2!
Snow Wolf 200w Temperature Control Box Mod:
- Resistance range: 0.05 – 2.5 ohm on the Snow wolf box mod 200w
- Battery voltage range: 6.2 – 8.4 volts
- Snow wolf 200w Box Mod Temperature control range: 100 – 350°C / 212 – 662°F
- Supports both Kanthal and nickel wires
- Accommodates 2 18650 sized batteries in the Snow wolf 200w
- Variable wattage range: 5.0 – 200 watts
- Snow wolf box mod Output voltage range: 0.5 – 7.0 volts
Whoever says that 200 watts is too much hasn’t tried a Snow Wolf. This amazing box has one of the newest smart chips in it that allows the box to know whether you’re using Temperature Control type wire, like nickel, or Kanthal and will automatically switch between the two. This allows you to not go through the hassle of going through the menus to adjust the power mode and temperature settings. Another nice thing about the Snow Wolf is that it when the device is fired above 150w with Kanthal wire, it will turn into a pulse effect so you won’t burn your cotton and still get it pretty dry without actually needing Temperature Control.
So come on down to Voltage Vapin’ and check out the Snow Wolf 200w Temperature Control box mod and join the Wolf Pack!
Interested in dripping but don’t want to drip after every couple of hits? The DripBox 160 is perfect, AND the Velocity V2 will work like a dream on it!
Kanger DRIPBOX 160W Squonk Kit
The Kanger DRIPBOX 160W system builds upon the revolutionary first DRIPBOX, integrating Kanger’s flagship PCB driven by dual 18650 batteries to output up to 160W of power alongside full temperature control for expanded range, versatility, and ability. A dramatic upgrade over the original DRIPBOX, now integrating Kanger’s new chipset that features a maximum output of 160W alongside temperature control suite with onboard support for Ni200 Nickel, TItanium, and Stainless Steel heating elements. The DRIPMOD features a dual battery design (sold separately) loaded from a locking battery door located on the base of the device. The chassis is manufactured out of Zinc Alloy and features an ergonomic chassis split in three components, with two compartments dedicated to batteries and the other compartment dedicated to the refillable squonk bottle. Designed from the ground up with an emphasis on creating the most plug and play RDA experiences to date, the SUBDRIP RDA features one of the first truly replaceable drip coil systems on the market. The SUBDRIP utilizes fully swappable and prebuilt build decks that can be utilized as is or can be rebuilt and reconfigured by the user. Each deck, in conjunction with the SUBDRIP base as well as the DRIPMOD’s reservoir bottle, features a squonk ready configuration that feeds liquid into the deck by user applied pressure from the cutout located on the DRIPMOD. This function essentially allows users to effectively feed liquid into the deck when needed, supplied by the absolutely massive 7ml refillable reservoir bottle capacity. The Kanger DRIPBOX 160W Squonk Kit is the perfect combination of power, affordability, and ease of use, making it an essential all day vape system.
- 160W Max Output
- 7 to 160W Output Range
- 0.1 ohm Minimum Atomizer Resistance
- 0.1W Adjustment Increments
- Temperature Control
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- 0.05 ohm Minimum Atomizer Resistance
- 200 to 600 degrees Fahrenheit
- 7ml Capacity
- Feeds from Bottle
- ‘Squonk’ Action
- Press to Feed into RDA Deck
- Easy and Convenient
- Dripper Experience with Tank Capacity
- Locking Battery Door
- Dual 18650 Battery Powered
- Gold Plated Spring Loaded 510
- Micro USB Charge Port
- 1A Charging Port
- Battery Charge Indicator
- Low Battery/Short Circuit/Reverse Polarity/Overtime Protection
- 22mm Diameter
- Swappable Build Decks
- Two Post Design
- 1.5mm Terminal
- Dual Adjustable Airflow
- 10mm by 1.5mm Airslots
- 12mm Widebore Delrin Drip Tip
- Two Post Design
- Stainless Steel Construction
- Gold Plated Squonk Ready 510 Contact
- One Kanger DRIPBOX 160W Squonk Kit
- Extra 7ml Squonk Bottle
- Two Prebuilt 0.2 ohm SUBDRIP Build Decks
- One Preinstalled
- One Micro USB Charging Cable
- One User Manual
Stop by and check out the Dripbox 160 at Voltage Vapin’!
Please make sure you have your I.D. present when entering the store.
We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you.
We still allow customers to bring their children in, as long as they are supervised by their parents. Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.
We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, and ETC all count.
We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.