iStick Pico 75W TC Now in Stock at Voltage Vapin’ (updated)

The Eleaf Pico 75W Temperature Control Just came in at Voltage Vapin’ and boy does it pack a punch!

Eleaf Pico 75W TCeleaf pico 75w

Eleaf iStick Pico is the newest mod to join the vaunted Eleaf family, featuring a design overhaul guided by Jay Bo Designs to produce one of the most compact 18650 platforms with the capability to fire up to 75W and the integration of sophisticated temperature control that features Ni200 Nickel, Titanium, and Stainless Steel heating elements alongside full TCR control. The iStick Pico features one of the most compact 18650 platforms measuring at 45mm by 23mm by 70.5mm coupled with incredible range and versatility as compared to it’s size. The iStick Pico has a power output range of 1 to 75W with a 0.1 to 3.5 ohm atomizer resistance range alongside a sophisticated temperature control output that has onboard support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. The Pico also integrates a three memory TCR mode that allows for even greater precision and control. With an emphasis on creating one of the most ergonomic and well balanced chassis designs to date, the Eleaf iStick Pico features a top loaded battery cap that allows the fitment of 18650 batteries, with the cap extending one half of the overall height by 5.5mm. The control face measures an incredible 65mm in height from base to 510, achieved by moving the up and down adjustment buttons into a recess located in the base. The iStick Pico features a full sized OLED screen that displays output wattage, output temperature, atomizer resistance, and battery life.
iStick Pico 75W TC Features:

  • 1 to 75W Power Output
    • 0.1 to 3.5 ohm Atomizer Resistance Range
    • Bypass Mode Feature
    • Firmware Upgradeable
  • Full Temperature Control Output
    • Ni200 Nickel Support
    • Titanium Support
    • Stainless Steel Support
    • Three Memory TCR Mode
      • Set Own Temperature Coefficient of Resistance
      • Fine Tune Output
    • 0.05 to 1.5 ohm Atomizer Resistance Range
    • 200 to 600 degrees Fahrenheit Range
  • Ultra Compact Form Factor
    • 45mm by 23mm by 70.5mm
  • Two Line OLED Screen
    • Battery Life Indicator
    • Output Wattage/Temperature
    • Atomizer Resistance
  • 18650 Powered
    • Top Loaded
    • Battery Not Included
  • Three Button Operation
    • Bottom Button Adjustment
  • Spring Loaded 510 Connection
  • Micro USB Charge Port


While you are here…

The Mini Royal Hunter RDA is the perfect fit for the Pico

Mini Royal Hunter RDA

(Discontinued)

royal hunter mini black and ss

The Royal Hunter Mini RDA by Council of Vapor is the evolution of the extremely popular Royal Hunter, packing in the full featured foundation of the original in a short and compact profile. Featuring a triple slotted airflow coupled with three 2mm airholes, the Royal Hunter Mini has tremendous airflow capacity while also being fully adjustable for dual coil purposes. The build deck features the squared PEEK insulators alongside deck milled negatives and a dual split positive post, with each posthole measuring 2mm to accommodate a wide variety of coil configurations. The honeycomb design has been improved, directly integrated into the 13mm wide competition bore delrin drip top, with white and black variations included with each set. This effect greatly increases turbulence in airflow, and with the shortened stature of the Mini, produces outstanding flavor and vapor while simultaneously minimizing spitback due to the inherent design. The Royal Hunter Mini also features the same visually stunning engraving on the base of the atomizer along with a Royal Hunter Mini engraving on the face of the RDA.

Product Features:

  • 22mm Diameter
  • 22mm Overall Height
  • Triple Slotted Airflow
    • Stacked
    • 8mm Wide
  • Triple 2mm Airholes
  • Fully Adjustable Airflow
  • Dual Split Positive Post
  • Deck Milled Negatives
  • 2mm Post Holes
  • Silver Plated Contact
  • Delrin Honeycomb 13mm Widebore Drip Top
    • White and Black Included
    • Removable and Easily Interchangeable
  • Silver Plated Contact
  • The Council of Vapor Engraving


Don’t forget about…

Snow Wolf 200W Box Mod

(Discontinued)

snow wolf 200w

 

 

Snow Wolf 200w Temperature Control Box Mod:

  • Resistance range: 0.05 – 2.5 ohm on the Snow wolf box mod 200w
  • Battery voltage range: 6.2 – 8.4 volts
  • Snow wolf 200w Box Mod Temperature control range: 100 – 350°C / 212 – 662°F
  • Supports both Kanthal and nickel wires
  • Accommodates 2 18650 sized batteries in the Snow wolf 200w
  • Variable wattage range: 5.0 – 200 watts
  • Snow wolf box mod Output voltage range: 0.5 – 7.0 volts

Whoever says that 200 watts is too much hasn’t tried a Snow Wolf. This amazing box has one of the newest smart chips in it that allows the box to know whether you’re using Temperature Control type wire, like nickel, or Kanthal and will automatically switch between the two. This allows you to not go through the hassle of going through the menus to adjust the power mode and temperature settings. Another nice thing about the Snow Wolf is that it when the device is fired above 150w with Kanthal wire, it will turn into a pulse effect so you won’t burn your cotton and still get it pretty dry without actually needing Temperature Control.

So come on down to Voltage Vapin’ and check out the Snow Wolf 200w Temperature Control box mod and join the Wolf Pack!



file under:

pico